Analog Connection PCB Kit

(No reviews yet) Write a Review

SKU:

807942

Shipping:

Free Shipping

Description
0 Reviews

Description

AMETEK Land item no. 807942

PCB connection board for used to connect to a SPOT pyromter or LWIR via analog connection. The customer is free to wire to the 24V power supply of their choice.

View AllClose

0 Reviews

View AllClose

Flow Adapter PCB Assembly

AMETEK Land

AMETEK Land item no. 703.862 Differential pressure sensor for Lancom 4 flow measurement and +/- 125 mm H2O draft measurement.

Tested Analogue PCB - Lancom 4

AMETEK Land

AMETEK Land item no. 806584 Replacement Lancom 4 main circuit board.

Main PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804320 Main circuit board with microprocessor. Configuration required - be sure to follow fitting instructions.

Detector PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804319 Detector circuit board. Alignment required - be sure to follow fitting instructions.

SPOT M12 to RJ45 Digital Cable

AMETEK Land

AMETEK Land item no. 807944 / 807945 / 812354 / 807946 Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC...

Small Pan & Tilt Bracket

AMETEK Land

AMETEK Land item no. 806761 This dual axis mounting bracket can be used with the water cooled mounting where the mounting front flange is inappropriate.

M16-Free 8 Way Cable 5m Str Connector — Quick view

SPOT M16 to Open Analog Cable

AMETEK Land

AMETEK Land item no. 807950 / 807951 / 812353 / 807952 One end fitted with an M16 connector for connection with the instrument, the other end an 8 way stripped leads cable. Sizes Available: 5m -...

Desktop PoE Injector

AMETEK Land

AMETEK Land item no. 810573 Power over Ethernet Injector used to power and transfer data for instruments such as SPOT, LWIR, and LSP-HD. (M12-RJ45 cable and ethernet cable are sold separately).

Lab Fibre Optic Adaptor

AMETEK Land

AMETEK Land item no. 029.238 S4 F/O ADAPTOR.

S4 Fibre Optic Angle Bracket

AMETEK Land

AMETEK Land item no. 029.224 S4 ANGLE BRACKET F/O

Male Adaptor 10mm Tube - 1" BSP (M) PLtd

AMETEK Land

AMETEK Land item no. 150.786 Compressed air inlet adaptor (male G1 to 10mm hose connector).

Disposable Filter 0.1 Micron

AMETEK Land

AMETEK Land item no.317.476 Mill/Silowatch and FGA Particulate Filter. Including replacement for Filter 0.1 Micron 317.430

Cyclops 100 L 2F

AMETEK Land

AMETEK Land item no. 809560 The 2F is designed to be able to measure from 600 to 1800 °C/ 1112 to 3272 °F without the need to change to the dark filter (typically glass applications) or for...

Filter Element for Plate Mtd Blower

AMETEK Land

AMETEK Land item no.317.561 Replacement filter for purge blower

Lancom 4 - Portable Flue Gas Analyser

AMETEK Land

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

Spare Actuator Digital Cable

AMETEK Land

AMETEK Land item no. 812033 M12 Ethernet M-F D Coded Cable Digital Power Cable 0.5M for SPOT Actuator - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network...

M16 8 Way to M16 12 Way Analogue Cable 0.3m

AMETEK Land

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.

Mounting Plate (S4 MP)

AMETEK Land

AMETEK Land item no. 029.263 S/A S4 LGE MTG ADAPTOR PLATE.

10mm-3/8" UNION Compression Fitting

AMETEK Land

AMETEK Land item no. 150.741 For 3/8" bar to 10mm tube fittings, pressure resistance 10 bar.

PTFE Tube 1/4" OD X 1/8" ID

AMETEK Land

AMETEK Land item no. 306.070 PTFE Tube 1/4inch ID - 1/8inch ID Price per/m, please confirm length required.

Flood LED PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804321 Flood LED including mount and connector.

PTFE Syringe Filter 1.0 um 1/8"luer

AMETEK Land

AMETEK Land item no. 801346 PTFE filter fits inside Lancom 4.

Cyclops 055 L

AMETEK Land

AMETEK Land item no.809558 Temperature Measurement Range: 1000 to 2000 °C / 1832 to 3632 °F With Bluetooth & USB connectivity. Spectral response of 0.55 µm Use clear protection...

SPOT Water Cooled Mounting

AMETEK Land

AMETEK Land item no. 808100 Spot purge and water cooled mounting. Recommended for use with Pan and Tilt Bracket 806761 This incorporates the integrated Protection Jacket and Purge plus the hinged...

SPOT Light Purge

AMETEK Land

AMETEK Land item no. 808015 The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research. Supplied with mounting...

S4 Purge Assembly (USA)

AMETEK Land

AMETEK Land item no. 091.807

S4 Connector & 4m Cable

AMETEK Land

AMETEK Land item no. 029.673 For System 4 Thermometers.

Autoprene Tube for Peristaltic Pump

AMETEK Land

AMETEK Land item no. 317.480 Single tube for old peristaltic pump.

1/4"OD x 3/16" ID PTFE Tube

AMETEK Land

AMETEK Land item no. 306.057 Thin-wall Teflon tube.

Cyclops 390 L

AMETEK Land

Temperature Measurement Range: 450 to 1400°C / 842 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 3.9µmUse sapphire protection window (Part 803355 supplied with...

Cyclops 160 L

AMETEK Land

AMETEK Land item no. 809561 Temperature Measurement Range: 200 to 1400°C / 392 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 1.6µm with advanced spectral...

AC PSU 60W 24V XP DNR60US24

AMETEK Land

AMETEK Land item no. 810229 Power supply for 4400 APS42.

4500 MkIII Retro 0.6m Pathlength

AMETEK Land

AMETEK Land item no. 804349 4500 MkIII retroreflector element, pathlength < 0.76 m (20 to 30 inches).

Connector Plate for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804542 Connector plate for bottom of 4500 MkIII transceiver

4500 MkIII Retro Rear Cover

AMETEK Land

AMETEK Land item no. 810801 Red retro mount. Does not include retroreflector.

Barbed Hose Insert POLYPR. 1/4

AMETEK Land

AMETEK Land item no. 317.109 Gas connector for Lancom 4 sample inlet.

Cyclops 100 L 1F

AMETEK Land

AMETEK Land item no. 809559 Temperature Measurement Range: 600 to 3000 °C / 1112 to 5432 °F With Bluetooth & USB connectivity. Spectral response of 0.8 to 1.1µm. 1 Eye Comfort...

VIRALERT 3 Imager

VIRALERT

High accuracy thermal imaging camera, with 80x64 thermal sensor and integrated 1280x960 visual sensor, designed for temperature screening measurements with blackbody on single platform. Suitable as a...

VIRALERT 3 Human Body Temperature Screening System (Visual & Thermal)

VIRALERT

Protect people from potential coronavirus carriers and those with other infectious diseases – the VIRALERT 3 screens visitors at entry for elevated temperatures that could indicate fever.Unlike...

S5 Actuator Analogue Cable 0.5m M-F — Quick view

Spare Actuator Analog Cable

AMETEK Land

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

Industrial PoE Injector

AMETEK Land

AMETEK Land item no. 808959

Hose Union (38mm)

AMETEK Land

AMETEK Land item no. 150.760

Fluoropolymer Diaphragm (For 703.630 & 801854)

AMETEK Land

AMETEK Land Part Number. 317.552 FGA and Millwatch sample pump diaphragm

One Year Consumable Parts Kit - 4650-PM

AMETEK Land

AMETEK Land item no. 810620

4750-PM Enclosure Gasket

AMETEK Land

AMETEK Land item no. 813557

Process AFU PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804648 Small circuit board for 4500 MkIII AFU

Detector PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804319 Detector circuit board. Alignment required - be sure to follow fitting instructions.

Lancom & FGAII Acid Gas Filter

AMETEK Land

AMETEK Land item no. 703.145 External acid gas filter.

Sinter Filter For Lancom Probe

AMETEK Land

AMETEK Land item no. 702.182 Probe-tip filter

VIRALERT 3 Relay Output Kit

VIRALERT

This kit includes all the items needed to allow users to connect to a contact closure output to the VIRALERT system. The kit includes I/O Module, desktop power supply and connecting cables. Suitable...

VIRALERT 3 Blackbody Reference Source

VIRALERT

Powered by 5V DC (USB) from a universal power adaptor, the fixed temperature reference source is at 38 °C (100.4 °F) for a combined accuracy/stability of ±0.2 °C (±0.3...

VIRALERT 3 / 3 Lite Tripod

VIRALERT

A tripod for installation on a flat surface to mount VIRALERT systems, VIRALERT 2 camera or calibration source. Suitable for: VIRALERT 3 and VIRALERT 3 Lite systems, VIRALERT 2 camera and VIRALERT 2...

Lens Cover for Cyclops

AMETEK Land Item No. 802083 Lens cover for Cyclops

Analog Connection PCB Kit

Write a Review

AMETEK Land

Analog Connection PCB Kit

Description

0 Reviews

Related Products