AMETEK Land

AMETEK Land item no. 092.427  

AMETEK Land item no. 092.506 A simple back-of-panel DIN-rail mounted signal processing unit designed for system builders and OEMs.

AMETEK Land item no. 318.068 Hose clip for purge blower

AMETEK Land Item No. 813678 Adaptor allows AMETEK Land 4500 MkIII and 4400 opacity monitors to fit TML LightHawk 560 flange.

AMETEK Land Item number. 703.020 Standpipe including mounting flange, studs and spring washers. Suitable for 4500 MkIII and 4400 opacity monitors.

AMETEK Land Item No. 809994   WHEN PURCHASING A 4500 MkIII, PLEASE DOWNLOAD THE SET-UP EXCEL FILE, COMPLETE AND RETURN TO LAND.US@AMETEK.COM    4500 MkIII is the most accurate...

AMETEK Land Item No.810283 Recommended for 4500 MkIII. Complete system including weather cover, Y-piece and pressure switch. One blower with Y-piece is sufficient for all normal applications.

AMETEK Land item no.317.561 Replacement filter for purge blower

AMETEK Land item no.812105 Replacement for obsolete infrared source 703.579. Includes an upgrade to firmware V1.1.

AMETEK Land item no.317.614 Replacement blower motor 110 V 60 Hz for 4500 MkIII

AMETEK Land item no.099.473 Basic air purge blower 110 V 60 Hz

AMETEK Land item no. 317.610 Replacement blower motor 110 V 60 Hz for 9100

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

AMETEK Land item no. 812033 M12 Ethernet M-F D Coded Cable Digital Power Cable 0.5M for SPOT Actuator - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network...

If the Actuator ambient temperature exceeds 50 °C / 122 °F, overheating is prevented in hot industrial environments with the water cooled Cooling Plate. Positioned between the mounting...

The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281

AMETEK Land item no. 811824 The SPOT Actuator is a smart-intelligent motorised scanning unit, including a webserver for easy access, configuration and monitoring. Three different scanning modes cover...

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.  

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

AMETEK Land item no. 806761 This dual axis mounting bracket can be used with the water cooled mounting where the mounting front flange is inappropriate.

AMETEK Land item no. 808100 Spot purge and water cooled mounting. Recommended for use with Pan and Tilt Bracket 806761 This incorporates the integrated Protection Jacket and Purge plus the hinged...

AMETEK Land item no. 808015 The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research. Supplied with mounting...

AMETEK Land item no. 810487

AMETEK Land item no. 811532 SD Memory Card (Industrial Grade)  

AMETEK Land item no. 811528 Anybus X-Gateway AB9001.  

AMETEK Land item no. 807942 PCB connection board for used to connect to a SPOT pyromter or LWIR via analog connection. The customer is free to wire to the 24V power supply of their choice.  

AMETEK Land item no. 807950 / 807951 / 812353 / 807952 One end fitted with an M16 connector for connection with the instrument, the other end an 8 way stripped leads cable. Sizes Available: 5m -...

AMETEK Land item no. 808441 24V power supply  

AMETEK Land item no. 808959

AMETEK Land item no. 810573 Power over Ethernet Injector used to power and transfer data for instruments such as SPOT, LWIR, and LSP-HD. (M12-RJ45 cable and ethernet cable are sold separately).

AMETEK Land item no. 807944 / 807945 / 812354 / 807946 Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC...

AMETEK Land item no. 812068 Panel Mount Housing for 4 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC Connection Output: 1 mV / deg and 0 (4) - 20 mA System...

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

AMETEK Land item no. 812066 Panel Mount Housing for 2 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

AMETEK Land item no. 812065 Panel Mount Housing for 1 IR Thermometer Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

AMETEK Land item no. 150.560 The small ball mount can be used with the fiber-optic adapter (809901). It can be used with any standard tripod or using a 1/4” UNC bolt to a surface.  

AMETEK Land item no. 029.238 S4 F/O ADAPTOR.  

AMETEK Land item no. 029.224 S4 ANGLE BRACKET F/O  

AMETEK Land item no. 029.873 The adapter, air purge and mounting bracket assembly attaches to the optic head, and provides mounting using the single hole in the base of the bracket. Alternatively,...

AMETEK Land item no. 806993

AMETEK Land item no. 030.566 LARGE BALL MOUNT ASSY S4.  

AMETEK Land item no. 029.263 S/A S4 LGE MTG ADAPTOR PLATE.  

AMETEK Land item no. 029.547 S4 ASSY WATER COOLED PLATE WF.  

AMETEK Land item no. 091.811 S4 LP - The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research.Supplied with...

AMETEK Land item no. 091.562 Rear Industrial End Cap for System 4 Style Thermometers. Comes with cable to plug into system 4 pyrometer.  Connects to 091.560.  

AMETEK Land item no. 150.786 Compressed air inlet adaptor (male G1 to 10mm hose connector).  

AMETEK Land item no. 150.741 For 3/8" bar to 10mm tube fittings, pressure resistance 10 bar.  

AMETEK Land item no. 091.807

AMETEK Land item no. 091.561 Industrial air purge for System 4 pyrometers. (Mounts to 091.812 and 091.560)  

AMETEK Land item no. 212.372 Connector for System 4 pyrometers. (Cable side)

AMETEK Land item no. 800589 For System 4 Thermometers fully assembled with ODU-Plug.  

AMETEK Land item no. 990.615 Fully assembled with ODU-Plug, Cable length: 10 Metres.  

AMETEK Land item no. 029.673 For System 4 Thermometers.  

AMETEK Land item no. 031.794

AMETEK Land item no. 802406

AMETEK Land item no. 031.402 Required to connect LSP Head to LSP Processor. Permits instrument operation in max ambient of 60°C.  

AMETEK Land item no. 150.139 Worm drive hose clip.  

AMETEK Land item no. 150.760

AMETEK Land item no. 150.759 Length: 3000mm, ambient temperature: max. 150°C.  

AMETEK Land item no. 704.374 Weather cover for plate mounted blower  

AMETEK Land item no. 317.560 Inertial prefilter for plate mounted blower.  

AMETEK Land item no. 805352

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

AMETEK Land item no. 812836 Beckhoff I/O Processor 2: Provides analog and digital I / Os for a maximum of 8 LSP-HD scanners, Type: DIN Rail Industrial PC, Interface: 2 x RJ-45 diagnostic- LEDs:...

AMETEK Land item no. 812835 *** new part number 812835 *** Beckhoff I/O Processor 1 Inputs: 4 digital, 2 analogue. Outputs: 4 digital, 4 analogue Provides analog and digital I/Os for a maximum of 8...

AMETEK Land item no. 800095 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

AMETEK Land item no. 031.438 For mounting LSP Head to walls.  

AMETEK Land item no. 031.496 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

AMETEK Land item no. 031.520 The basic base plate is used in applications where an LSP-HD head is to be installed in environments where the ambient temperatures are within the recommended operating...

AMETEK Land item no. 199.003

AMETEK Land item no. 812674 A terminal box which allows connection of the incoming LSP-HD connection cable via an industrial ethernet port, incoming mains power and the downstream data connection via...

AMETEK Land item no. 805024 An unsealed power supply for use in clean environments to provide power for the LSP-HD. Input Power Supply: 90 to 264 V ac Instrument Connection:1 x RJ45 termination...

AMETEK Land item no. 807105 DIN rail mounting, Supply voltage: 48 V DC, Dimensions: 48.6 x 140 x 95 mm (W x H x D) max. Ambient temperature: LSP-HD 80 ° C, Connection: RJ45 Power over Ethernet...

AMETEK Land item no. 805037 A terminal box which allows connection of the incoming LSP-HD connection cable via an M12 industrial ethernet port, incoming mains power and the downstream data connection...

AMETEK Land item no. 805199

AMETEK Land item no. 805023 Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug, Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug    

AMETEK Land item no. 804977 Connection cable between the LSP-HD head and the LSP Power Supply unit; pre-terminated with M12 industrial ethernet connectors this single cable provides both data and...

AMETEK Land item no. 807087 Connection cable between the LSP-HD head and the LSP Power Supply unit; pre-terminated with M12 industrial ethernet connectors this single cable provides both data and...

AMETEK Land item no. 805038 Connection cable between the LSP-HD head and the LSP Power Supply unit; pre-terminated with M12 industrial ethernet connectors this single cable provides both data and...

AMETEK Land item no.702.728

AMETEK Land item no. 323.270

AMETEK Land item no.702.760 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C 

AMETEK Land item no.702.759 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C 

AMETEK Land item no. 702.424 Probe comprises a 19mm stainless steel tube with a 25·m sintered tip. Mounting flange is 3/4inch ANSI 150lb (flat-face, 98 od., 27.5 id., four 13.0 holes on 70 pcd...

AMETEK Land item no. 702.620

AMETEK Land item no. 317.480 Single tube for old peristaltic pump.    

AMETEK Land item no. 703.444 3-way solenoid valve for sample changeover.  

AMETEK Land item no. 702.821 Purge pump for CO sensor overload protection.  

AMETEK Land item no. 701.828 Clear catchpot for gas cooler.  

AMETEK Land item no. 306.057 Thin-wall Teflon tube.  

AMETEK Land item no. 306.070 PTFE Tube 1/4inch ID - 1/8inch ID Price per/m, please confirm length required.  

AMETEK Land item no. 703.646 6 pieces gas filter, 317.476 3 pieces Twin Autoprene Tube Assembly, 801402 6 pieces Replacement pump head, 317.553 2 pieces Replacement Fluoropolymer Diaphragm, 317...

AMETEK Land item no. 704.011 For FGA900 Series FGA9xx NO2 Sensor Unit Spent sensors contain toxic and acidic elements hazardous to the environment, and should be disposed of in accordance with...

AMETEK Land item no. 703.016 FGA9xx CO Sensor Unit Spent sensors contain toxic and acidic elements hazardous to the environment, and should be disposed of in accordance with prevailing hazardous...

AMETEK Land item no. 702.518 FGA9xx NO Sensor Unit Spent sensors contain toxic and acidic elements hazardous to the environment, and should be disposed of in accordance with prevailing hazardous...

AMETEK Land item no. 801486 Calibration Rig Adaptor - SOLOnet  

AMETEK Land item no. 135.172 For R1200P Calibration Source.  

AMETEK Land item no. CAL PTS Add additional calibration test points to the Standard 3 point ISO Certificate (optional item). Test points must be specified by customer. PLEASE ENTER THE TEMPERATURE...

Certificate provided with 3 actual temperature measurement points with uncertainty calculations. Points must be specified by customer. PLEASE ENTER THE TEMPERATURE POINTS IN THE BOX ABOVE Additional...