Flow Adapter PCB Assembly

Related Products

Main PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804320 Main circuit board with microprocessor. Configuration required - be sure to follow fitting instructions.

Detector PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804319 Detector circuit board. Alignment required - be sure to follow fitting instructions.

Main AFU PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804645 Large circuit board for 4500 MkIII AFU

Analog Connection PCB Kit

AMETEK Land

AMETEK Land item no. 807942 PCB connection board for use with the above cable selection. The customer is free to wire to the 24V power supply of their choice.

Customers Also Viewed

Tested Analogue PCB - Lancom 4

AMETEK Land

AMETEK Land item no. 806584 Replacement Lancom 4 main circuit board.

Lancom 4 - Portable Flue Gas Analyser

AMETEK Land

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

Smoke Filter Paper Packet of 200

AMETEK Land

AMETEK Land item no. 701.616 Smoke spot filters for use with Lancom 4 smoke probe.

Silicone Tube CLEAR 1.5mm I/D

AMETEK Land

AMETEK Land item no. 306.040 Clear silicone tube for Lancom 4

DRYSAMPLER Handle & Hose 10 m

AMETEK Land

AMETEK Land item no. 323.174 Probe handle with patented moisture removal mechanism. Requires probe tube.

Mobile Device with Cyclops App

AMETEK Land

AMETEK Land item no. 809797

SPOT Actuator Handset + 5m Cable

AMETEK Land

The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281

M16-Free 8 Way Cable 5m Str Connector — Quick view

SPOT M16 to Open Analog Cable

AMETEK Land

AMETEK Land item no. 807950 / 807951 / 812353 / 807952 One end fitted with an M16 connector for connection with the instrument, the other end an 8 way stripped leads cable. Sizes Available: 5m -...

LSP Purge Cooling System

AMETEK Land

AMETEK Land item no. 800095 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

Purge Pump PCB (FGA 9xx SERIES)

AMETEK Land

AMETEK Land item no. 702.821 Purge pump for CO sensor overload protection.

Fuse and fittings kit for Mill & Silo

AMETEK Land

AMETEK Land item no. 807478

4750-PM Replacement Lens

AMETEK Land

AMETEK Land item no. 813564

4500 Weather Cover - Large Standpipe

AMETEK Land

AMETEK Land item no. 807275 Provides protection from driving rain and intense sunshine. Fits 4500 MkII+ standpipe 702.790.Use for 4500 MkII+ and 4500 MkIII with mains-powered shutter.

750mm Probe Pipe for Lancom Smoke Probe

AMETEK Land

AMETEK Land item no. 800410 Replacement tube for Lancom 4 smoke probe.

USB to RS232 Serial Converter Cable

AMETEK Land

AMETEK Land item no. 806886 Data converter for use with Insight software.

USB A to USB B Cable 2m

AMETEK Land

AMETEK Land item no. 806884 Lancom 4 USB data cable.

LANCOM H.T.Probe Ferrule

AMETEK Land

AMETEK Land item no. 704.189 Rubber seal for Lancom 4 high-temperature probe tube.

Compensating Cable Type K

AMETEK Land

AMETEK Land item no. 403.836

3Way PCB Mount Sol/Valve 12V

AMETEK Land

AMETEK Land item no. 317.492 Valve for Lancom 4 zero calibration function.

LANCOM NO Sensor

AMETEK Land

AMETEK Land item no. 703.239 Nitric oxide sensor for Lancom III and Lancom 4

LANCOM CO(H2) Sensor

AMETEK Land

AMETEK Land item no. 703.915 Carbon monoxide sensor with hydrogen compensation for Lancom III and Lancom 4

Barbed Hose Insert POLYPR. 1/4

AMETEK Land

AMETEK Land item no. 317.109 Gas connector for Lancom 4 sample inlet.

Lancom 4 Printer - Replacement Paper

AMETEK Land

AMETEK Land item no. 806745 Thermal paper for external printer

Lancom & FGAII Acid Gas Filter

AMETEK Land

AMETEK Land item no. 703.145 External acid gas filter.

0.75 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.383 Probe measures smoke spot number. Not suitable for gas sampling.

0.3 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.374 Probe measures smoke spot number. Not suitable for gas sampling.

Lancom 3.0 m Probe Tube

AMETEK Land

AMETEK Land item no. 702.207 Stainless steel probe tube and filter. Maximum temperature 600 C (1112 °F). For use with 703.128 / 703.163 / 323.173 / 323.178

DRYSAMPLER Handle & Hose 3 m

AMETEK Land

AMETEK Land item no. 323.173 Probe handle with patented moisture removal mechanism. Requires probe tube.

Thermal Cover - Cyclops with bumper

AMETEK Land

AMETEK Land item no. 811279

Lens Number 110

AMETEK Land

AMETEK Land item no. 804041 215 mm fixed focus for measuring point diameter of 0.4 mm. Lens only available for the Cyclops 100

VIRALERT 3 Blackbody Reference Source

VIRALERT

Powered by 5V DC (USB) from a universal power adaptor, the fixed temperature reference source is at 38 °C (100.4 °F) for a combined accuracy/stability of ±0.2 °C (±0.3...

S5 Actuator Analogue Cable 0.5m M-F — Quick view

Spare Actuator Analog Cable

AMETEK Land

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

Small Pan & Tilt Bracket

AMETEK Land

AMETEK Land item no. 806761 This dual axis mounting bracket can be used with the water cooled mounting where the mounting front flange is inappropriate.

SPOT Water Cooled Mounting

AMETEK Land

AMETEK Land item no. 808100 Spot purge and water cooled mounting. Recommended for use with Pan and Tilt Bracket 806761 This incorporates the integrated Protection Jacket and Purge plus the hinged...

Analog Connection PCB Kit

AMETEK Land

AMETEK Land item no. 807942 PCB connection board for use with the above cable selection. The customer is free to wire to the 24V power supply of their choice.

Power Supply (90W 24V)

AMETEK Land

AMETEK Land item no. 808441 PSU unit for 808959

Desktop PoE Injector

AMETEK Land

AMETEK Land item no. 810573

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

LMG MkII 1000 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812065 Panel Mount Housing for 1 IR Thermometer Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

Small Ball Joint (S4 B)

AMETEK Land

AMETEK Land item no. 150.560 The small ball mount can be used with the fiber-optic adapter (809901). It can be used with any standard tripod or using a 1/4” UNC bolt to a surface.

S4 Mounting kit JCP-AF

AMETEK Land

AMETEK Land item no. 806993

Mounting Shoe (S4 WF)

AMETEK Land

AMETEK Land item no. 029.547 S4 ASSY WATER COOLED PLATE WF.

S4 LP Light Air Purge

AMETEK Land

AMETEK Land item no. 091.811 S4 LP - The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research.Supplied with...

System 4 Connector & Cable 10 metre

AMETEK Land

AMETEK Land item no. 990.615 Fully assembled with ODU-Plug, Cable length: 10 Metres.

LSP Connection Cable Assembly 50m

AMETEK Land

AMETEK Land item no. 802406

LSP 15m Connection Cable

AMETEK Land

AMETEK Land item no. 031.402 Required to connect LSP Head to LSP Processor. Permits instrument operation in max ambient of 60°C.

Hose Union (38mm)

AMETEK Land

AMETEK Land item no. 150.760

Blower Weather Proof Cover

AMETEK Land

AMETEK Land item no. 704.374 Weather cover for plate mounted blower

Power Supply Unit for I/O Processor

AMETEK Land

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

Flow Adapter PCB Assembly

Write a Review

AMETEK Land

Flow Adapter PCB Assembly

Description

0 Reviews

Related Products