Spare Actuator Analog Cable

(No reviews yet) Write a Review

SKU:

812037

Shipping:

Free Shipping

Description
0 Reviews

Description

AMETEK Land item no. 812037

S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying leads.

View AllClose

0 Reviews

View AllClose

SPOT M16 to Open Analog Cable

AMETEK Land

AMETEK Land item no. 807950 / 807951 / 812353 / 807952 One end fitted with an M16 connector for connection with the instrument, the other end an 8 way stripped leads cable. Sizes Available: 5m -...

M16 8 Way to M16 12 Way Analogue Cable 0.3m

AMETEK Land

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.

AMETEK Land item no. 811824 The SPOT Actuator is a smart-intelligent motorised scanning unit, including a webserver for easy access, configuration and monitoring. Three different scanning modes cover...

SPOT Actuator Handset + 5m Cable

AMETEK Land

The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281

Spare Actuator Digital Cable

AMETEK Land

AMETEK Land item no. 812033 M12 Ethernet M-F D Coded Cable Digital Power Cable 0.5M for SPOT Actuator - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network...

SPOT M16 to Open Analog Cable

AMETEK Land

AMETEK Land item no. 807950 / 807951 / 812353 / 807952 One end fitted with an M16 connector for connection with the instrument, the other end an 8 way stripped leads cable. Sizes Available: 5m -...

M12-RJ45 Cable 5m Straight Connector — Quick view

SPOT M12 to RJ45 Digital Cable

AMETEK Land

AMETEK Land item no. 807944 / 807945 / 812354 / 807946 Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC...

Male Adaptor 10mm Tube - 1" BSP (M) PLtd

AMETEK Land

AMETEK Land item no. 150.786 Compressed air inlet adaptor (male G1 to 10mm hose connector).

IP 68 Plug (For S4 Cable Assembly)

AMETEK Land

AMETEK Land item no. 212.372 Connector for System 4 pyrometers. (Cable side)

Spare Actuator Digital Cable

AMETEK Land

AMETEK Land item no. 812033 M12 Ethernet M-F D Coded Cable Digital Power Cable 0.5M for SPOT Actuator - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network...

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

Air Purge (S4P)

AMETEK Land

AMETEK Land item no. 091.561 Industrial air purge for System 4 pyrometers. (Mounts to 091.812 and 091.560)

4750-PM Display LED Segments

AMETEK Land

AMETEK Land item no. 813558

Clear Protection Window - Cyclops (not C390)

AMETEK Land

AMETEK Land item no. 802061

M16 8 Way to M16 12 Way Analogue Cable 0.3m

AMETEK Land

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.

SPOT Water Cooled Mounting

AMETEK Land

AMETEK Land item no. 808100 Spot purge and water cooled mounting. Recommended for use with Pan and Tilt Bracket 806761 This incorporates the integrated Protection Jacket and Purge plus the hinged...

Desktop PoE Injector

AMETEK Land

AMETEK Land item no. 810573 Power over Ethernet Injector used to power and transfer data for instruments such as SPOT, LWIR, and LSP-HD. (M12-RJ45 cable and ethernet cable are sold separately).

4 way M12 to RJ45 Cable (0.5m)

AMETEK Land

AMETEK Land item no. 805023 Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug, Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug

FGA 1.0 m Probe

AMETEK Land

AMETEK Land item no.702.759 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C

1yr Consumable Parts, Small Blower- 4650

AMETEK Land

AMETEK Land item no. 810627

Recommended Spares Kit MC - 4650-PM

AMETEK Land

AMETEK Land item no. 810623

Model 4500 MkIII Panel-mount CRU

AMETEK Land

AMETEK Land item no. 805585 Spare PLC for 805583 and 805584

M10 Full Nut (set of 3)

AMETEK Land

AMETEK Land item no. 804561 Set of plain nuts for 4500 MkIII flange. Sufficient for one flange.

4500 MkIII Calibration Stand Kit

AMETEK Land

AMETEK Land item no. 809807 Calibration stands and power supply for off-stack adjustment of 4500 mkIII. Used for off-stack calibration.

Lancom Probe Handle & 3m Hose

AMETEK Land

AMETEK Land item no. 703.128 Probe handle. Requires probe tube.

Blower 110V 60Hz, cover, Y-pc, P-switch

AMETEK Land

AMETEK Land Item No.810283 Recommended for 4500 MkIII. Complete system including weather cover, Y-piece and pressure switch. One blower with Y-piece is sufficient for all normal applications.

9100 Spare Source Heater

AMETEK Land

AMETEK Land item no.812105 Replacement for obsolete infrared source 703.579. Includes an upgrade to firmware V1.1.

SPOT Mounting Bracket & Lock Nut

AMETEK Land

AMETEK Land item no. 810487

Analog Connection PCB Kit

AMETEK Land

AMETEK Land item no. 807942 PCB connection board for used to connect to a SPOT pyromter or LWIR via analog connection. The customer is free to wire to the 24V power supply of their choice.

LMG MkII 1100 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812066 Panel Mount Housing for 2 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

LMG MkII 1000 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812065 Panel Mount Housing for 1 IR Thermometer Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

S4 LP Light Air Purge

AMETEK Land

AMETEK Land item no. 091.811 S4 LP - The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research.Supplied with...

System 4 Connector & Cable 10 metre

AMETEK Land

AMETEK Land item no. 990.615 Fully assembled with ODU-Plug, Cable length: 10 Metres.

Power Supply Unit for I/O Processor

AMETEK Land

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

Cyclops 390 L

AMETEK Land

Temperature Measurement Range: 450 to 1400°C / 842 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 3.9µmUse sapphire protection window (Part 803355 supplied with...

Cyclops 160 L

AMETEK Land

AMETEK Land item no. 809561 Temperature Measurement Range: 200 to 1400°C / 392 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 1.6µm with advanced spectral...

FGA Main BOARD Tested

AMETEK Land

AMETEK Land item no.805093 Mill/Silowatch and FGA Main Board (Replaces 702.613)

4750-PM Audit unit 300 mg/m3

AMETEK Land

AMETEK Land item no. 813571

M12 Nyloc Nuts (Kit of 3)

AMETEK Land

AMETEK Land item no. 808904 Set of locking nuts for 4500 MkII+ flange. Sufficient for one flange.

4500 MkIII External Zero Device

AMETEK Land

AMETEK Land item no. 807141 External zero device for 4500 MkIII. Requires adjustment before use. Must be configured before use.

LANCOM SO2 Sensor

AMETEK Land

AMETEK Land item no. 703.241 Sulfur dioxide sensor for Lancom III and Lancom 4

LANCOM Low CO Sensor

AMETEK Land

AMETEK Land item no. 703.236 Standard carbon monoxide sensor for Lancom III and Lancom 4

Sinter Filter For Lancom Probe

AMETEK Land

AMETEK Land item no. 702.182 Probe-tip filter

1.0 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.384 Not to be used for gas sampling.

Filter Element for Plate Mtd Blower

AMETEK Land

AMETEK Land item no.317.561 Replacement filter for purge blower

Lancom 4 - Portable Flue Gas Analyser

AMETEK Land

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

SPOT Actuator Handset + 5m Cable

AMETEK Land

The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281

SPOT Actuator

AMETEK Land

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

SPOT Light Purge

AMETEK Land

AMETEK Land item no. 808015 The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research. Supplied with mounting...

Small Ball Joint (S4 B)

AMETEK Land

AMETEK Land item no. 150.560 The small ball mount can be used with the fiber-optic adapter (809901). It can be used with any standard tripod or using a 1/4” UNC bolt to a surface.