4500 MkII+ to 4500 MkIII Adaptor Kit

(No reviews yet) Write a Review

SKU:

804248

Shipping:

Free Shipping

Description
0 Reviews

Description

AMETEK Land item no. 804248

Adaptor flange allows 4500 MkIII to mount to 4500 MkII+ standpipe. Two needed for each instrument.

View AllClose

0 Reviews

View AllClose

Model 4500 MkIII Spares Kit - 2 Years

AMETEK Land

AMETEK Land item no. 809979 Includes microfiber lens cloth and two flange sealing rings.

Transceiver Case for 4500 MkIII

AMETEK Land

AMETEK Land item no. 810800 Rear case (red) including membrane keypad.

Lens for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804285 Main lens including barrel and focus spacers.

4500 MkIII Calibration Stand Kit

AMETEK Land

AMETEK Land item no. 809807 Calibration stands and power supply for off-stack adjustment of 4500 mkIII. Used for off-stack calibration.

Calibration Rig Adaptor - SOLOnet

AMETEK Land

AMETEK Land item no. 801486 Calibration Rig Adaptor - SOLOnet

4500 MKIII cal stand replacement PSU kit

AMETEK Land

AMETEK Land item no. 811633 Replacement power supply for 4500 MkIII off-stack calibration.

4500 MkIII Opacity System

AMETEK Land

AMETEK Land Item No. 809994 WHEN PURCHASING A 4500 MkIII, PLEASE DOWNLOAD THE SET-UP EXCEL FILE, COMPLETE AND RETURN TO LAND.US@AMETEK.COM 4500 MkIII is the most accurate...

Dark Filter Protection Window — Quick view

2” ANSI adaptor for AMETEK Land Opacity Monitors

AMETEK Land

AMETEK Land Item No. 813678 Adaptor allows AMETEK Land 4500 MkIII and 4400 opacity monitors to fit TML LightHawk 560 flange.

Lancom 4 - Portable Flue Gas Analyser

AMETEK Land

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

Spherical Washer - Mount.Flange

AMETEK Land

AMETEK Land item no. 702.749 Set of plain nuts for 4500 MkII+ flange. Sufficient for one flange.

Sprint 8 Cooling Jacket

AMETEK Land Part No. 3310A23010 Cooled jacket for Sprint 8 (inc. purge & bracket) without mounting angle

Standpipe for AMETEK Land Opacity Monitors

AMETEK Land

AMETEK Land Item number. 703.020 Standpipe including mounting flange, studs and spring washers. Suitable for 4500 MkIII and 4400 opacity monitors.

SPOT Actuator Handset + 5m Cable

AMETEK Land

The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

LMG MkII 1100 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812066 Panel Mount Housing for 2 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

Power Supply Unit for I/O Processor

AMETEK Land

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

I/O Processor 2 - IN(8D/4A) OUT(12D/12A)

AMETEK Land

AMETEK Land item no. 812836 Beckhoff I/O Processor 2: Provides analog and digital I / Os for a maximum of 8 LSP-HD scanners, Type: DIN Rail Industrial PC, Interface: 2 x RJ-45 diagnostic- LEDs:...

LSP Purge / Cooling Plate

AMETEK Land

AMETEK Land item no. 031.496 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

Fuse and fittings kit for Mill & Silo

AMETEK Land

AMETEK Land item no. 807478

4650-PM PT1000

AMETEK Land

AMETEK Land item no. 810639

Recommended Spares Kit MC - 4650-PM

AMETEK Land

AMETEK Land item no. 810623

4750-PM Detector

AMETEK Land

AMETEK Land item no. 813561

4750-PM Audit unit 30 mg/m3

AMETEK Land

AMETEK Land item no. 813567

Motor & Clutch - 4500 MkIII FSS

AMETEK Land

AMETEK Land item no. 809069 Spare for 809068

4400 Zero Reflector

AMETEK Land

AMETEK Land item no. 810217

13 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801526 4500 MkIII retroreflector element, pathlength > 10.6 m (418 to 600 inches).

3 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801524 4500 MkIII retroreflector element, pathlength 2.03 to 4.29 m ( 80 to 169 inches).

Head Cover Screws (Pk of 4) AFU

AMETEK Land

AMETEK Land item no. 812112 Screws for door of 4500 MkIII AFU-APS-I/O

4500 MK III Analogue I/O Upgrade Kit

AMETEK Land

AMETEK Land item no. 807334 Small circuit board for 4500 MkIII AFU with mountings and labels

4500 MkIII 19" Rack Mount CRU with I/O

AMETEK Land

AMETEK Land item no. 805583 Remote display and diagnostics for 4500 MkIII opacity monitor. Includes status relays and 4-20 mA outputs.

Gasket For LANCOM Catchpot

AMETEK Land

AMETEK Land item no. 703.752 Rubber gasket for Lancom 4 catchpot 704.344.

PTFE Syringe Filter 1.0 um 1/8"luer

AMETEK Land

AMETEK Land item no. 801346 PTFE filter fits inside Lancom 4.

VIRALERT 3 / 3 Lite Tripod

VIRALERT

A tripod for installation on a flat surface to mount VIRALERT systems, VIRALERT 2 camera or calibration source. Suitable for: VIRALERT 3 and VIRALERT 3 Lite systems, VIRALERT 2 camera and VIRALERT 2...

VIRALERT 3 / 3 Lite Clamp Mount Bracket

VIRALERT

A mounting bracket with a clamp to connect to a desk or table. Suitable for: VIRALERT 3 and 3 Lite systems. AMETEK Land item no. 814267

VIRALERT 3 / 3 Lite Surface Mount Bracket

VIRALERT

An adjustable mounting bracket that can be screwed to a wall, ceiling or any other flat surface. Fixings included. Suitable for: VIRALERT 3 and 3 Lite systems. AMETEK Land item no. 814266

Sprint 8 Air Purge Unit

AMETEK Land Part No. 3310A22010 Air purge with mounting plate for Sprint

Landmark Basic Processor (LMB)

AMETEK Land

AMETEK Land item no. 092.506 A simple back-of-panel DIN-rail mounted signal processing unit designed for system builders and OEMs.

Blower 110V 60Hz, cover, Y-pc, P-switch

AMETEK Land

AMETEK Land Item No.810283 Recommended for 4500 MkIII. Complete system including weather cover, Y-piece and pressure switch. One blower with Y-piece is sufficient for all normal applications.

Small Pan & Tilt Bracket

AMETEK Land

AMETEK Land item no. 806761 This dual axis mounting bracket can be used with the water cooled mounting where the mounting front flange is inappropriate.

SD Memory Card (Industrial Grade)

AMETEK Land

AMETEK Land item no. 811532 SD Memory Card (Industrial Grade)

Desktop PoE Injector

AMETEK Land

AMETEK Land item no. 810573 Power over Ethernet Injector used to power and transfer data for instruments such as SPOT, LWIR, and LSP-HD. (M12-RJ45 cable and ethernet cable are sold separately).

M12-RJ45 Cable 5m Straight Connector — Quick view

SPOT M12 to RJ45 Digital Cable

AMETEK Land

AMETEK Land item no. 807944 / 807945 / 812354 / 807946 Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC...

LMG MkII 1111 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812068 Panel Mount Housing for 4 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC Connection Output: 1 mV / deg and 0 (4) - 20 mA System...

S4 Fibre Optic Angle Bracket

AMETEK Land

AMETEK Land item no. 029.224 S4 ANGLE BRACKET F/O

S4 Mounting kit JCP-AF

AMETEK Land

AMETEK Land item no. 806993

H/Temp Cable & FISHER Connector

AMETEK Land

AMETEK Land item no. 031.794

4m Neoprene Air Hose (ID 38mm)

AMETEK Land

AMETEK Land item no. 150.759 Length: 3000mm, ambient temperature: max. 150°C.

LSP-HD PSU Module

AMETEK Land

AMETEK Land item no. 805037 A terminal box which allows connection of the incoming LSP-HD connection cable via an M12 industrial ethernet port, incoming mains power and the downstream data connection...

15m M12 to M12 Ethernet Cable - HT

AMETEK Land

AMETEK Land item no. 804977 Connection cable between the LSP-HD head and the LSP Power Supply unit; pre-terminated with M12 industrial ethernet connectors this single cable provides both data and...

FGA 1.5 m Probe

AMETEK Land

AMETEK Land item no.702.760 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C

FGA 1.0 m Probe

AMETEK Land

AMETEK Land item no.702.759 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C

FGA 0.5 m Probe

AMETEK Land

AMETEK Land item no. 702.424 Probe comprises a 19mm stainless steel tube with a 25·m sintered tip. Mounting flange is 3/4inch ANSI 150lb (flat-face, 98 od., 27.5 id., four 13.0 holes on 70 pcd...

Cyclops 390 L

AMETEK Land

Temperature Measurement Range: 450 to 1400°C / 842 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 3.9µmUse sapphire protection window (Part 803355 supplied with...

4500 MkII+ to 4500 MkIII Adaptor Kit

Write a Review

AMETEK Land

4500 MkII+ to 4500 MkIII Adaptor Kit

Description

0 Reviews

Related Products