4500 MkIII Calibration Stand Kit

(No reviews yet) Write a Review

SKU:

809807

Shipping:

Free Shipping

Description
0 Reviews

Description

AMETEK Land item no. 809807

Calibration stands and power supply for off-stack adjustment of 4500 mkIII. Used for off-stack calibration.

View AllClose

0 Reviews

View AllClose

Transceiver Case for 4500 MkIII

AMETEK Land

AMETEK Land item no. 810800 Rear case (red) including membrane keypad.

Lens for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804285 Main lens including barrel and focus spacers.

4500 MKIII cal stand replacement PSU kit

AMETEK Land

AMETEK Land item no. 811633 Replacement power supply for 4500 MkIII off-stack calibration.

4500 MkII+ to 4500 MkIII Adaptor Kit

AMETEK Land

AMETEK Land item no. 804248 Adaptor flange allows 4500 MkIII to mount to 4500 MkII+ standpipe. Two needed for each instrument.

Male Adaptor 10mm Tube - 1" BSP (M) PLtd

AMETEK Land

AMETEK Land item no. 150.786 Compressed air inlet adaptor (male G1 to 10mm hose connector).

Filter Element for Plate Mtd Blower

AMETEK Land

AMETEK Land item no.317.561 Replacement filter for purge blower

Cyclops 390 L

AMETEK Land

Temperature Measurement Range: 450 to 1400°C / 842 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 3.9µmUse sapphire protection window (Part 803355 supplied with...

Clear Protection Window - Cyclops (not C390)

AMETEK Land

AMETEK Land item no. 802061

Cyclops 160 L

AMETEK Land

AMETEK Land item no. 809561 Temperature Measurement Range: 200 to 1400°C / 392 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 1.6µm with advanced spectral...

Recommended Spares Kit MC - 4650-PM

AMETEK Land

AMETEK Land item no. 810623

4500 MkIII External Zero Device

AMETEK Land

AMETEK Land item no. 807141 External zero device for 4500 MkIII. Requires adjustment before use. Must be configured before use.

Air Purge (S4P)

AMETEK Land

AMETEK Land item no. 091.561 Industrial air purge for System 4 pyrometers. (Mounts to 091.812 and 091.560)

PTFE Tube 1/4" OD X 1/8" ID

AMETEK Land

AMETEK Land item no. 306.070 PTFE Tube 1/4inch ID - 1/8inch ID Price per/m, please confirm length required.

FGA Main BOARD Tested

AMETEK Land

AMETEK Land item no.805093 Mill/Silowatch and FGA Main Board (Replaces 702.613)

M12 Nyloc Nuts (Kit of 3)

AMETEK Land

AMETEK Land item no. 808904 Set of locking nuts for 4500 MkII+ flange. Sufficient for one flange.

M10 Full Nut (set of 3)

AMETEK Land

AMETEK Land item no. 804561 Set of plain nuts for 4500 MkIII flange. Sufficient for one flange.

Cyclops 055 L

AMETEK Land

AMETEK Land item no.809558 Temperature Measurement Range: 1000 to 2000 °C / 1832 to 3632 °F With Bluetooth & USB connectivity. Spectral response of 0.55 µm Use clear protection...

IP 68 Plug (For S4 Cable Assembly)

AMETEK Land

AMETEK Land item no. 212.372 Connector for System 4 pyrometers. (Cable side)

Power Supply Unit for I/O Processor

AMETEK Land

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

1yr Consumable Parts, Small Blower- 4650

AMETEK Land

AMETEK Land item no. 810627

4500 MkIII Retro 0.6m Pathlength

AMETEK Land

AMETEK Land item no. 804349 4500 MkIII retroreflector element, pathlength < 0.76 m (20 to 30 inches).

1.0 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.384 Not to be used for gas sampling.

Lancom Probe Handle & 3m Hose

AMETEK Land

AMETEK Land item no. 703.128 Probe handle. Requires probe tube.

Cyclops 100 L 2F

AMETEK Land

AMETEK Land item no. 809560 The 2F is designed to be able to measure from 600 to 1800 °C/ 1112 to 3272 °F without the need to change to the dark filter (typically glass applications) or for...

VIRALERT 3 Relay Output Kit — Quick view

This kit includes all the items needed to allow users to connect to a contact closure output to the VIRALERT system. The kit includes I/O Module, desktop power supply and connecting cables. Suitable...

9100 Spare Source Heater

AMETEK Land

AMETEK Land item no.812105 Replacement for obsolete infrared source 703.579. Includes an upgrade to firmware V1.1.

S5 Actuator Analogue Cable 0.5m M-F — Quick view

Spare Actuator Analog Cable

AMETEK Land

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

S4 Purge Assembly (USA)

AMETEK Land

AMETEK Land item no. 091.807

4750-PM Display LED Segments

AMETEK Land

AMETEK Land item no. 813558

4750-PM Audit unit 300 mg/m3

AMETEK Land

AMETEK Land item no. 813571

AC PSU 60W 24V XP DNR60US24

AMETEK Land

AMETEK Land item no. 810229 Power supply for 4400 APS42.

Model 4500 MkIII Panel-mount CRU

AMETEK Land

AMETEK Land item no. 805585 Spare PLC for 805583 and 805584

STUD M10x110mm LONG ST ST (Set of 3)

AMETEK Land

AMETEK Land item no. 809645 Set of studs for 4500 MkIII flange. Sufficient for one flange.

Connector Plate for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804542 Connector plate for bottom of 4500 MkIII transceiver

Flood LED PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804321 Flood LED including mount and connector.

4500 MkIII 19" Rack Mount CRU no I/O

AMETEK Land

AMETEK Land item no. 805584 Remote display and diagnostics for 4500 MkIII opacity monitor.

Disposable Filter High Efficiency 0.1um

AMETEK Land

AMETEK Land item no. 812325 Fine particle filter for use with high-temperature probe. Filter 812325 is an ultra-fine filter which is useful in applications where 317.476 allows material to pass...

Sinter Filter For Lancom Probe

AMETEK Land

AMETEK Land item no. 702.182 Probe-tip filter

M16 8 Way to M16 12 Way Analogue Cable 0.3m

AMETEK Land

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.

4 way M12 to RJ45 Cable (0.5m)

AMETEK Land

AMETEK Land item no. 805023 Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug, Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug

Ceramic Filter For UA Probe

AMETEK Land

AMETEK Land item no. 323.270

Autoprene Tube for Peristaltic Pump

AMETEK Land

AMETEK Land item no. 317.480 Single tube for old peristaltic pump.

One Year Consumable Parts Kit - 4650-PM

AMETEK Land

AMETEK Land item no. 810620

4500 MkIII Retro Rear Cover

AMETEK Land

AMETEK Land item no. 810801 Red retro mount. Does not include retroreflector.

4500 MkIII 19" Rack Mount CRU with I/O

AMETEK Land

AMETEK Land item no. 805583 Remote display and diagnostics for 4500 MkIII opacity monitor. Includes status relays and 4-20 mA outputs.

Smoke Filter Paper Packet of 200

AMETEK Land

AMETEK Land item no. 701.616 Smoke spot filters for use with Lancom 4 smoke probe.

Probe Locator with Lock Screw

AMETEK Land

AMETEK Land item no. 318.433 Cone for probe tube.

Cyclops Lens Protection Hood

AMETEK Land

AMETEK Land item no. 809636

VIRALERT 3 Human Body Temperature Screening System (Visual & Thermal)

VIRALERT

Protect people from potential coronavirus carriers and those with other infectious diseases – the VIRALERT 3 screens visitors at entry for elevated temperatures that could indicate fever.Unlike...

Desktop PoE Injector

AMETEK Land

AMETEK Land item no. 810573 Power over Ethernet Injector used to power and transfer data for instruments such as SPOT, LWIR, and LSP-HD. (M12-RJ45 cable and ethernet cable are sold separately).

LSP-HD PSU Module

AMETEK Land

AMETEK Land item no. 805037 A terminal box which allows connection of the incoming LSP-HD connection cable via an M12 industrial ethernet port, incoming mains power and the downstream data connection...