Connector Plate for 4500 MkIII

Related Products

Transceiver Case for 4500 MkIII

AMETEK Land

AMETEK Land item no. 810800 Rear case (red) including membrane keypad.

Lens for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804285 Main lens including barrel and focus spacers.

Display Assembly for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804537 Liquid crystal display and circuit board.

Autocal Assembly for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804322 Automatic calibration unit including zero reflector and upscale filter.

Customers Also Viewed

2 Year Spares Kit (FGA900 series)

AMETEK Land

AMETEK Land item no. 703.646 6 pieces gas filter, 317.476 3 pieces Twin Autoprene Tube Assembly, 801402 6 pieces Replacement pump head, 317.553 2 pieces Replacement Viton Diaphragm, 317.552

Main AFU PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804645 Large circuit board for 4500 MkIII AFU

Spare Actuator Digital Cable

AMETEK Land

AMETEK Land item no. 812033 M12 Ethernet M-F D Coded Cable Digital Power Cable 0.5M for SPOT Actuator - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network...

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

LMG MkII 1000 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812065 Panel Mount Housing for 1 IR Thermometer Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

R1200P Spare Thermocouple

AMETEK Land

AMETEK Land item no. 135.172 For R1200P Calibration Source.

1 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801523 4500 MkIII retroreflector element, pathlength 1.09 to 2.02 m (43 to 79 inches).

Process AFU PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804648 Small circuit board for 4500 MkIII AFU

Transceiver Case for 4500 MkIII

AMETEK Land

AMETEK Land item no. 810800 Rear case (red) including membrane keypad.

Flange Sealing Ring (small)

AMETEK Land

AMETEK Land item no. 701.972 Viton rubber sealing ring for small standpipe 703.020.

Smoke Filter Paper Packet of 200

AMETEK Land

AMETEK Land item no. 701.616 Smoke spot filters for use with Lancom 4 smoke probe.

USB to RS232 Serial Converter Cable

AMETEK Land

AMETEK Land item no. 806886 Data converter for use with Insight software.

Silicone Tube CLEAR 1.5mm I/D

AMETEK Land

AMETEK Land item no. 306.040 Clear silicone tube for Lancom 4

Lancom 4 Printer - Replacement Paper

AMETEK Land

AMETEK Land item no. 806745 Thermal paper for external printer

Lancom Replaceable Dust Filter

AMETEK Land

AMETEK Land item no. 703.144 External dust filter

Lancom 4 Spares Kit

AMETEK Land

AMETEK Land item no. 810539 Consumables kit includes: Probe tip filter Dust filter Acid gas filter Hose connector (2) O-ring for probe handle (2) PTFE membrane filter Catchpot gasket Fuse

Lancom Flow Probe 3.0 m

AMETEK Land

AMETEK Land item no. 703.473 S-type pitot tube for measurements of flue gas velocity. Requires hose 703.474 or 703.475.

Clear Protection Window - Cyclops (not C390)

AMETEK Land

AMETEK Land item no. 802061

Lens Number 110

AMETEK Land

AMETEK Land item no. 804041 215 mm fixed focus for measuring point diameter of 0.4 mm. Lens only available for the Cyclops 100

Cyclops 055 L

AMETEK Land

AMETEK Land item no.809558 Temperature Measurement Range: 1000 to 2000 °C / 1832 to 3632 °F With Bluetooth & USB connectivity. Spectral response of 0.55 µm Use clear protection...

9100 Spare Source Heater

AMETEK Land

AMETEK Land item no.812105 Replacement for obsolete infrared source 703.579. Includes an upgrade to firmware V1.1.

Blower Small 110 V 60 Hz

AMETEK Land

AMETEK Land item no.317.614 Replacement blower motor 110 V 60 Hz for 4500 MkIII

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

SPOT Actuator Handset + 5m Cable

AMETEK Land

The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

SPOT Water Cooled Mounting

AMETEK Land

AMETEK Land item no. 808100 Spot purge and water cooled mounting. Recommended for use with Pan and Tilt Bracket 806761 This incorporates the integrated Protection Jacket and Purge plus the hinged...

Analog Connection PCB Kit

AMETEK Land

AMETEK Land item no. 807942 PCB connection board for use with the above cable selection. The customer is free to wire to the 24V power supply of their choice.

M16-Free 8 Way Cable 5m Str Connector — Quick view

SPOT M16 to Open Analog Cable

AMETEK Land

AMETEK Land item no. 807950 / 807951 / 812353 / 807952 One end fitted with an M16 connector for connection with the instrument, the other end an 8 way stripped leads cable. Sizes Available: 5m -...

M12-RJ45 Cable 5m Straight Connector — Quick view

SPOT M12 to RJ45 Digital Cable

AMETEK Land

AMETEK Land item no. 807944 / 807945 / 812354 / 807946 Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC...

S4 Fibre Optic Angle Bracket

AMETEK Land

AMETEK Land item no. 029.224 S4 ANGLE BRACKET F/O

Large Ball Joint (S4 LB)

AMETEK Land

AMETEK Land item no. 030.566 LARGE BALL MOUNT ASSY S4.

S4 LP Light Air Purge

AMETEK Land

AMETEK Land item no. 091.811 S4 LP - The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research.Supplied with...

10mm-3/8" UNION Compression Fitting

AMETEK Land

AMETEK Land item no. 150.741 For 3/8" bar to 10mm tube fittings, pressure resistance 10 bar.

System 4 Connector & Cable 10 metre

AMETEK Land

AMETEK Land item no. 990.615 Fully assembled with ODU-Plug, Cable length: 10 Metres.

H/Temp Cable & FISHER Connector

AMETEK Land

AMETEK Land item no. 031.794

LSP Connection Cable Assembly 50m

AMETEK Land

AMETEK Land item no. 802406

LSP 15m Connection Cable

AMETEK Land

AMETEK Land item no. 031.402 Required to connect LSP Head to LSP Processor. Permits instrument operation in max ambient of 60°C.

Blower Air Pre-Filter

AMETEK Land

AMETEK Land item no. 317.560 Inertial prefilter for plate mounted blower.

LSP Vertical Mount

AMETEK Land

AMETEK Land item no. 031.438 For mounting LSP Head to walls.

LSP Purge / Cooling Plate

AMETEK Land

AMETEK Land item no. 031.496 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

LSP Basic Mounting Plate

AMETEK Land

AMETEK Land item no. 031.520 The basic base plate is used in applications where an LSP-HD head is to be installed in environments where the ambient temperatures are within the recommended operating...

LSP-HD PSU Module

AMETEK Land

AMETEK Land item no. 805037 A terminal box which allows connection of the incoming LSP-HD connection cable via an M12 industrial ethernet port, incoming mains power and the downstream data connection...

FGA 0.5 m Probe

AMETEK Land

AMETEK Land item no. 702.424 Probe comprises a 19mm stainless steel tube with a 25·m sintered tip. Mounting flange is 3/4inch ANSI 150lb (flat-face, 98 od., 27.5 id., four 13.0 holes on 70 pcd...

Purge Pump PCB (FGA 9xx SERIES)

AMETEK Land

AMETEK Land item no. 702.821 Purge pump for CO sensor overload protection.

1/4"OD x 3/16" ID PTFE Tube

AMETEK Land

AMETEK Land item no. 306.057 Thin-wall Teflon tube.

FGA9xx NO2 Sensor Unit

AMETEK Land

AMETEK Land item no. 704.011 For FGA900 Series FGA9xx NO2 Sensor Unit Spent sensors contain toxic and acidic elements hazardous to the environment, and should be disposed of in accordance with...

FGA9xx CO Sensor Unit

AMETEK Land

AMETEK Land item no. 703.016 FGA9xx CO Sensor Unit Spent sensors contain toxic and acidic elements hazardous to the environment, and should be disposed of in accordance with prevailing hazardous...

Additional Calibration Points

AMETEK Land

AMETEK Land item no. CAL PTS Add additional calibration test points to the Standard 3 point ISO Certificate (optional item). Test points must be specified by customer. PLEASE ENTER THE TEMPERATURE...

ISO 17025 3PT Certification on New Instrument

AMETEK Land

Certificate provided with 3 actual temperature measurement points with uncertainty calculations. Points must be specified by customer. PLEASE ENTER THE TEMPERATURE POINTS IN THE BOX ABOVE Additional...

Connector Plate for 4500 MkIII

Write a Review

AMETEK Land

Connector Plate for 4500 MkIII

Description

0 Reviews

Related Products