Spherical Washer (set of 3)

Related Products

Disc Spring Washer (set of 24)

AMETEK Land

AMETEK Land item no. 804558 Set of disc springs for 4500 MkIII flange. Sufficient for one flange.

M10 Nyloc Nut (set of 3)

AMETEK Land

AMETEK Land item no. 804559 Set of locking nuts for 4500 MkIII flange. Sufficient for one flange.

M10 Full Nut (set of 3)

AMETEK Land

AMETEK Land item no. 804561 Set of plain nuts for 4500 MkIII flange. Sufficient for one flange.

STUD M10x110mm LONG ST ST (Set of 3)

AMETEK Land

AMETEK Land item no. 809645 Set of studs for 4500 MkIII flange. Sufficient for one flange.

Spherical Washer - Mount.Flange

AMETEK Land

AMETEK Land item no. 702.749 Set of plain nuts for 4500 MkII+ flange. Sufficient for one flange.

Customers Also Viewed

Fail-safe Shutter - 4500 MkIII

AMETEK Land

AMETEK Land item no. 809068

S4 Fibre Optic Angle Bracket

AMETEK Land

AMETEK Land item no. 029.224 S4 ANGLE BRACKET F/O

LSP-E Power Over Ethernet Supply Module

AMETEK Land

AMETEK Land item no. 805024 An unsealed power supply for use in clean environments to provide power for the LSP-HD. Input Power Supply: 90 to 264 V ac Instrument Connection:1 x RJ45 termination...

Disc Spring Washer (set of 24)

AMETEK Land

AMETEK Land item no. 804558 Set of disc springs for 4500 MkIII flange. Sufficient for one flange.

AFU gland plate seal

AMETEK Land

AMETEK Land item no. 812681 Sealing gasket for bottom gland plate of 4500 mkIII AFU-APS-I/O.

SPOT Mounting Bracket & Lock Nut

AMETEK Land

AMETEK Land item no. 810487

M16-Free 8 Way Cable 5m Str Connector — Quick view

SPOT M16 to Open Analog Cable

AMETEK Land

AMETEK Land item no. 807950 / 807951 / 812353 / 807952 One end fitted with an M16 connector for connection with the instrument, the other end an 8 way stripped leads cable. Sizes Available: 5m -...

IP 68 Plug (For S4 Cable Assembly)

AMETEK Land

AMETEK Land item no. 212.372 Connector for System 4 pyrometers. (Cable side)

Standard Certificate of Calibration on New Instrument

AMETEK Land

Certificate provided with customer specified temperature span. If no span is specified, the span performed will be determined by set span ranges per instrument type. PLEASE ENTER THE TEMPERATURE SPAN...

Stream 2 Flow sensor

AMETEK Land

AMETEK Land item no. 801399 For Twin-stream Mill/Silowatch.

Condenser Unit & Heat Sink Twin-Stream

AMETEK Land

AMETEK Land item no. 801373 For twin-stream Mill/Silowatch.

CO Sensor for Millwatch

AMETEK Land

AMETEK Land item no. 702.818 Standard Mill/Silowatch CO sensor.

4650-PM PT1000

AMETEK Land

AMETEK Land item no. 810639

13 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801526 4500 MkIII retroreflector element, pathlength > 10.6 m (418 to 600 inches).

4500 MkIII Retro 0.6m Pathlength

AMETEK Land

AMETEK Land item no. 804349 4500 MkIII retroreflector element, pathlength < 0.76 m (20 to 30 inches).

4500 MkIII Calibration Stand Kit

AMETEK Land

AMETEK Land item no. 809807 Calibration stands and power supply for off-stack adjustment of 4500 mkIII. Used for off-stack calibration.

Upscale Filter for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804404 Grid filter set for 4500 MkIII calibration unit.

Calibration Motor & Gearbox

AMETEK Land

AMETEK Land item no. 804368 Motor for 4500 MkIII automatic calibration unit

Case Hinge Set for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804394 Hinges for transceiver or retro purge.

Case Clip Set for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804390 Stainless steel clips fasten transceiver or retro to purge mount.

4500 MkIII 19" Rack Mount CRU no I/O

AMETEK Land

AMETEK Land item no. 805584 Remote display and diagnostics for 4500 MkIII opacity monitor.

Smoke Filter Paper Packet of 200

AMETEK Land

AMETEK Land item no. 701.616 Smoke spot filters for use with Lancom 4 smoke probe.

PTFE Syringe Filter 1.0 um 1/8"luer

AMETEK Land

AMETEK Land item no. 801346 PTFE filter fits inside Lancom 4.

Disposable Filter High Efficiency 0.1um

AMETEK Land

AMETEK Land item no. 812325 Fine particle filter for use with high-temperature probe. Filter 812325 is an ultra-fine filter which is useful in applications where 317.476 allows material to pass...

0.3 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.374 Probe measures smoke spot number. Not suitable for gas sampling.

Lancom 1.0 m Probe Tube

AMETEK Land

AMETEK Land item no. 702.205 Stainless steel probe tube and filter. Maximum temperature 600 C (1112 °F). For use with 703.128 / 703.163 / 323.173 / 323.175

Lancom Probe Handle & 3m Hose

AMETEK Land

AMETEK Land item no. 703.128 Probe handle. Requires probe tube.

Lens Number 135

AMETEK Land

AMETEK Land item no. 804218 Focusing range: 450-620 mm Measuring area: diameter of 1.8 to 2.7 mm

Mobile Device with Cyclops App

AMETEK Land

AMETEK Land item no. 809797

S4 Backcap Cable

AMETEK Land item no. 29.605 S4 backcap cable - 6 wire cable used to connect System 4 pyrometers to a System 4 end cap (091.562)

Standpipe for AMETEK Land Opacity Monitors

AMETEK Land

AMETEK Land Item number. 703.020 Standpipe including mounting flange, studs and spring washers. Suitable for 4500 MkIII and 4400 opacity monitors.

S5 Actuator Analogue Cable 0.5m M-F — Quick view

Spare Actuator Analog Cable

AMETEK Land

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

M16 8 Way to M16 12 Way Analogue Cable 0.3m

AMETEK Land

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.

Small Pan & Tilt Bracket

AMETEK Land

AMETEK Land item no. 806761 This dual axis mounting bracket can be used with the water cooled mounting where the mounting front flange is inappropriate.

SPOT Water Cooled Mounting

AMETEK Land

AMETEK Land item no. 808100 Spot purge and water cooled mounting. Recommended for use with Pan and Tilt Bracket 806761 This incorporates the integrated Protection Jacket and Purge plus the hinged...

Desktop PoE Injector

AMETEK Land

AMETEK Land item no. 810573 Power over Ethernet Injector used to power and transfer data for instruments such as SPOT, LWIR, and LSP-HD. (M12-RJ45 cable and ethernet cable are sold separately).

M12-RJ45 Cable 5m Straight Connector — Quick view

SPOT M12 to RJ45 Digital Cable

AMETEK Land

AMETEK Land item no. 807944 / 807945 / 812354 / 807946 Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC...

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

Mounting Shoe (S4 WF)

AMETEK Land

AMETEK Land item no. 029.547 S4 ASSY WATER COOLED PLATE WF.

Back Cap (S4C)

AMETEK Land

AMETEK Land item no. 091.562 Rear Industrial End Cap for System 4 Style Thermometers. Comes with cable to plug into system 4 pyrometer. Connects to 091.560.

10mm-3/8" UNION Compression Fitting

AMETEK Land

AMETEK Land item no. 150.741 For 3/8" bar to 10mm tube fittings, pressure resistance 10 bar.

S4 Purge Assembly (USA)

AMETEK Land

AMETEK Land item no. 091.807

H/Temp Cable & FISHER Connector

AMETEK Land

AMETEK Land item no. 031.794

LSP 15m Connection Cable

AMETEK Land

AMETEK Land item no. 031.402 Required to connect LSP Head to LSP Processor. Permits instrument operation in max ambient of 60°C.

Blower Weather Proof Cover

AMETEK Land

AMETEK Land item no. 704.374 Weather cover for plate mounted blower

Power Supply Unit for I/O Processor

AMETEK Land

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

LSP Vertical Mount

AMETEK Land

AMETEK Land item no. 031.438 For mounting LSP Head to walls.

LSP Basic Mounting Plate

AMETEK Land

AMETEK Land item no. 031.520 The basic base plate is used in applications where an LSP-HD head is to be installed in environments where the ambient temperatures are within the recommended operating...

ANNUNCIATOR 24V DC

AMETEK Land

AMETEK Land item no. 199.003

Spherical Washer (set of 3)

Write a Review

AMETEK Land

Spherical Washer (set of 3)

Description

0 Reviews

Related Products