Spherical Washer - Mount.Flange

Flange Stud - 145 mm Long for FSS

AMETEK Land

AMETEK Land item no. 802823 Set of curved washers for 4500 MkII+ flange. Sufficient for one flange.

Upscale Grating Set - 4500 MkIII

AMETEK Land

AMETEK Land item no. 804367 Adjustment gratings for 4500 MkIII upscale filter

4500 MkIII Retro Rear Cover

AMETEK Land

AMETEK Land item no. 810801 Red retro mount. Does not include retroreflector.

Lens Cloth

AMETEK Land

AMETEK Land item no. 320.804 Microfiber lens cloth for cleaning optics.

4500 MkIII 19" Rack Mount CRU with I/O

AMETEK Land

AMETEK Land item no. 805583 Remote display and diagnostics for 4500 MkIII opacity monitor. Includes status relays and 4-20 mA outputs.

Tested Analogue PCB - Lancom 4

AMETEK Land

AMETEK Land item no. 806584 Replacement Lancom 4 main circuit board.

Spare Actuator Digital Cable

AMETEK Land

AMETEK Land item no. 812033 M12 Ethernet M-F D Coded Cable Digital Power Cable 0.5M for SPOT Actuator - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network...

3 Way 24VDC Solenoid Valve

AMETEK Land

AMETEK Land item no. 317.479 For Mill/Silowatch blowback.

4650-PM O Ring Entry/Exit Baffle

AMETEK Land

AMETEK Land item no. 810650

Recommended Spares, Small Blower - 4650

AMETEK Land

AMETEK Land item no. 810628

Complete 'O' Ring Kit - 4650-PM

AMETEK Land

AMETEK Land item no. 810619

Kit of 12 Disc Springs (Belleville)

AMETEK Land

AMETEK Land item no. 805884 Set of disc springs for 4500 MkII+ flange. Three sets needed for each flange.

Air Hose (ID 38mm) Price Per Metre

AMETEK Land

AMETEK Land item no. 306.046 Flexible air hoise for 4500 MkIII.

4500 MkII+ to 4500 MkIII Adaptor Kit

AMETEK Land

AMETEK Land item no. 804248 Adaptor flange allows 4500 MkIII to mount to 4500 MkII+ standpipe. Two needed for each instrument.

Head Cover Screws (Pk of 4) AFU

AMETEK Land

AMETEK Land item no. 812112 Screws for door of 4500 MkIII AFU-APS-I/O

Main AFU PCB for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804645 Large circuit board for 4500 MkIII AFU

4500 MKIII cal stand replacement PSU kit

AMETEK Land

AMETEK Land item no. 811633 Replacement power supply for 4500 MkIII off-stack calibration.

4mm DIA SIL.RUBBER CORD 40SHOR

AMETEK Land

AMETEK Land item no. 306.307 Gasket cord for transceiver or retro seal.

300mm Probe Pipe for Lancom Smoke Probe

AMETEK Land

AMETEK Land item no. 800409 Replacement tube for Lancom 4 smoke probe.

Gasket For LANCOM Catchpot

AMETEK Land

AMETEK Land item no. 703.752 Rubber gasket for Lancom 4 catchpot 704.344.

LANCOM CO High Sensor

AMETEK Land

AMETEK Land item no. 703.248 High-range carbon monoxide sensor for Lancom III and Lancom 4

Lancom Flow Probe 3.0 m

AMETEK Land

AMETEK Land item no. 703.473 S-type pitot tube for measurements of flue gas velocity. Requires hose 703.474 or 703.475.

Lancom Flow Probe 2.2 m

AMETEK Land

AMETEK Land item no. 703.472 S-type pitot tube for measurements of flue gas velocity. Requires hose 703.474 or 703.475.

Lancom 2.0 m Probe Tube

AMETEK Land

AMETEK Land item no. 703.440 Stainless steel probe tube and filter. Maximum temperature 600 C (1112 °F). For use with 703.128 / 703.163 / 323.173 / 323.177

VIRALERT 3 / 3 Lite Surface Mount Bracket

VIRALERT

An adjustable mounting bracket that can be screwed to a wall, ceiling or any other flat surface. Fixings included. Suitable for: VIRALERT 3 and 3 Lite systems. AMETEK Land item no. 814266

2” ANSI adaptor for AMETEK Land Opacity Monitors

AMETEK Land

AMETEK Land Item No. 813678 Adaptor allows AMETEK Land 4500 MkIII and 4400 opacity monitors to fit TML LightHawk 560 flange.

Lancom 4 - Portable Flue Gas Analyser

AMETEK Land

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

SPOT Actuator Cooling Plate Assembly

AMETEK Land

If the Actuator ambient temperature exceeds 50 °C / 122 °F, overheating is prevented in hot industrial environments with the water cooled Cooling Plate. Positioned between the mounting...

M16 8 Way to M16 12 Way Analogue Cable 0.3m

AMETEK Land

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

S4 Fibre Optic Angle Bracket

AMETEK Land

AMETEK Land item no. 029.224 S4 ANGLE BRACKET F/O

S4 Purge Assembly (USA)

AMETEK Land

AMETEK Land item no. 091.807

IP 68 Plug (For S4 Cable Assembly)

AMETEK Land

AMETEK Land item no. 212.372

S4 Connector & Cable 35m 6 Cores

AMETEK Land

AMETEK Land item no. 800589 For System 4 Thermometers fully assembled with ODU-Plug.

System 4 Connector & Cable 10 metre

AMETEK Land

AMETEK Land item no. 990.615 Fully assembled with ODU-Plug, Cable length: 10 Metres.

H/Temp Cable & FISHER Connector

AMETEK Land

AMETEK Land item no. 031.794

Blower Air Hose Clip

AMETEK Land

AMETEK Land item no. 150.139 Worm drive hose clip.

Blower Air Pre-Filter

AMETEK Land

AMETEK Land item no. 317.560 Inertial prefilter for plate mounted blower.

LSP Vertical Mount

AMETEK Land

AMETEK Land item no. 031.438 For mounting LSP Head to walls.

LSP Purge / Cooling Plate

AMETEK Land

AMETEK Land item no. 031.496 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

LSP Basic Mounting Plate

AMETEK Land

AMETEK Land item no. 031.520 The basic base plate is used in applications where an LSP-HD head is to be installed in environments where the ambient temperatures are within the recommended operating...

LSP-HD PSU Module (UL approved)

AMETEK Land

AMETEK Land item no. 812674 A terminal box which allows connection of the incoming LSP-HD connection cable via an industrial ethernet port, incoming mains power and the downstream data connection via...