9100 Spare Source Heater

Related Products

Lancom 4 Spares Kit

AMETEK Land

AMETEK Land item no. 810539 Consumables kit includes: Probe tip filter Dust filter Acid gas filter Hose connector (2) O-ring for probe handle (2) PTFE membrane filter Catchpot gasket Fuse

LANCOM Spare Catchpot & Bracket

AMETEK Land

AMETEK Land item no. 704.344 Moisture collector for Lancom 4.

Spare gasket kit for 099.392

AMETEK Land

AMETEK Land item no. 809926 For Millwatch probe 099.392

Spare Actuator Digital Cable

AMETEK Land

AMETEK Land item no. 812033 M12 Ethernet M-F D Coded Cable Digital Power Cable 0.5M for SPOT Actuator - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network...

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

Customers Also Viewed

Filter Element for Plate Mtd Blower

AMETEK Land

AMETEK Land item no.317.561 Replacement filter for purge blower

Cyclops 390 L

AMETEK Land

Temperature Measurement Range: 450 to 1400°C / 842 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 3.9µmUse sapphire protection window (Part 803355 supplied with...

Recommended Spares Kit MC - 4650-PM

AMETEK Land

AMETEK Land item no. 810623

Model 4500 MkIII Panel-mount CRU

AMETEK Land

AMETEK Land item no. 805585 Spare PLC for 805583 and 805584

Male Adaptor 10mm Tube - 1" BSP (M) PLtd

AMETEK Land

AMETEK Land item no. 150.786 Compressed air inlet adaptor (male G1 to 10mm hose connector).

Air Purge (S4P)

AMETEK Land

AMETEK Land item no. 091.561 Air Purge for System 4 Style Thermometers.

IP 68 Plug (For S4 Cable Assembly)

AMETEK Land

AMETEK Land item no. 212.372

Cyclops 160 L

AMETEK Land

AMETEK Land item no. 809561 Temperature Measurement Range: 200 to 1400°C / 392 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 1.6µm with advanced spectral...

4500 MkIII Calibration Stand Kit

AMETEK Land

AMETEK Land item no. 809807 Calibration stands and power supply for off-stack adjustment of 4500 mkIII. Used for off-stack calibration.

DRYSAMPLER Probe Body

AMETEK Land

AMETEK Land item no. 323.350

Lancom Probe Handle & 3m Hose

AMETEK Land

AMETEK Land item no. 703.128 Probe handle. Requires probe tube.

Clear Protection Window - Cyclops (not C390)

AMETEK Land

AMETEK Land item no. 802061

Power Supply Unit for I/O Processor

AMETEK Land

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

4 way M12 to RJ45 Cable (0.5m)

AMETEK Land

AMETEK Land item no. 805023 Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug, Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug

FGA 1.0 m Probe

AMETEK Land

AMETEK Land item no.702.759 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C

1yr Consumable Parts, Small Blower- 4650

AMETEK Land

AMETEK Land item no. 810627

4750-PM Display LED Segments

AMETEK Land

AMETEK Land item no. 813558

M12 Nyloc Nuts (Kit of 3)

AMETEK Land

AMETEK Land item no. 808904 Set of locking nuts for 4500 MkII+ flange. Sufficient for one flange.

STUD M10x110mm LONG ST ST (Set of 3)

AMETEK Land

AMETEK Land item no. 809645 Set of studs for 4500 MkIII flange. Sufficient for one flange.

Tested Analogue PCB - Lancom 4

AMETEK Land

AMETEK Land item no. 806584 Replacement Lancom 4 main circuit board.

LANCOM Low CO Sensor

AMETEK Land

AMETEK Land item no. 703.236 Standard carbon monoxide sensor for Lancom III and Lancom 4

Sinter Filter For Lancom Probe

AMETEK Land

AMETEK Land item no. 702.182 Probe-tip filter

1.0 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.384 Not to be used for gas sampling.

Blower 110V 60Hz, cover, Y-pc, P-switch

AMETEK Land

AMETEK Land Item No.810283 Recommended for 4500 MkIII. Complete system including weather cover, Y-piece and pressure switch. One blower with Y-piece is sufficient for all normal applications.

Spare Actuator Analog Cable

AMETEK Land

Ceramic Filter For UA Probe

AMETEK Land

AMETEK Land item no. 323.270

FGA Main BOARD Tested

AMETEK Land

AMETEK Land item no.805093 Mill/Silowatch and FGA Main Board (Replaces 702.613)

4750-PM Audit unit 300 mg/m3

AMETEK Land

AMETEK Land item no. 813571

M10 Full Nut (set of 3)

AMETEK Land

AMETEK Land item no. 804561 Set of plain nuts for 4500 MkIII flange. Sufficient for one flange.

4500 MkIII External Zero Device

AMETEK Land

AMETEK Land item no. 807141 External zero device for 4500 MkIII. Requires adjustment before use. Must be configured before use.

Probe Locator with Lock Screw

AMETEK Land

AMETEK Land item no. 318.433 Cone for probe tube.

LANCOM SO2 Sensor

AMETEK Land

AMETEK Land item no. 703.241 Sulfur dioxide sensor for Lancom III and Lancom 4

Blower Small 110 V 60 Hz

AMETEK Land

AMETEK Land item no.317.614 Replacement blower motor 110 V 60 Hz for 4500 MkIII

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

Blower Weather Proof Cover

AMETEK Land

AMETEK Land item no. 704.374 Weather cover for plate mounted blower

FGA9xx CO Sensor Unit

AMETEK Land

AMETEK Land item no. 703.016 FGA9xx CO Sensor Unit Spent sensors contain toxic and acidic elements hazardous to the environment, and should be disposed of in accordance with prevailing hazardous...

Calibration Rig Adaptor - SOLOnet

AMETEK Land

AMETEK Land item no. 801486 Calibration Rig Adaptor - SOLOnet

Spare Pump Head (For 703.630 & 801854)

AMETEK Land

AMETEK Land item no. 317.553 FGA9xx and Millwatch sample pump head

1 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801523 4500 MkIII retroreflector element, pathlength 1.09 to 2.02 m (43 to 79 inches).

4500 MkIII Retro 0.6m Pathlength

AMETEK Land

AMETEK Land item no. 804349 4500 MkIII retroreflector element, pathlength < 0.76 m (20 to 30 inches).

Zero Reflector 4500 MkIII

AMETEK Land

AMETEK Land item no. 804405 Zero reflector for 4500 MkIII calibration unit, pathlengths below 8 m

Flange Sealing Ring (small)

AMETEK Land

AMETEK Land item no. 701.972 Viton rubber sealing ring for small standpipe 703.020.

Gas Pump LANCOM & DUO

AMETEK Land

AMETEK Land item no. 703.164 Sample pump.

Disposable Filter High Efficiency 0.1um

AMETEK Land

AMETEK Land item no. 812325 Fine particle filter for use with high-temperature probe. Filter 812325 is an ultra-fine filter which is useful in applications where 317.476 allows material to pass...

Lancom Replaceable Dust Filter

AMETEK Land

AMETEK Land item no. 703.144 External dust filter

DRYSAMPLER Handle & Hose 10 m

AMETEK Land

AMETEK Land item no. 323.174 Probe handle with patented moisture removal mechanism. Requires probe tube.

Cyclops 055 L

AMETEK Land

AMETEK Land item no.809558 Temperature Measurement Range: 1000 to 2000 °C / 1832 to 3632 °F With Bluetooth & USB connectivity. Spectral response of 0.55 µm Use clear protection...

Blower Hose Clip

AMETEK Land

AMETEK Land item no. 318.068 Hose clip for purge blower

Blower Large 110V 60HZ 1PH

AMETEK Land

AMETEK Land item no. 317.610 Replacement blower motor 110 V 60 Hz for 9100

Lancom 4 - Portable Flue Gas Analyser

AMETEK Land

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

9100 Spare Source Heater

Write a Review

AMETEK Land

9100 Spare Source Heater

Description

0 Reviews

Related Products