4500 MkIII Zero Cal Aperture Set

Related Products

Zero Reflector 4500 MkIII

AMETEK Land

AMETEK Land item no. 804405 Zero reflector for 4500 MkIII calibration unit, pathlengths below 8 m

Zero Reflector 4500 MkIII (>=8 m Path)

AMETEK Land

AMETEK Land item no. 806963 Zero reflector for 4500 MkIII calibration unit, pathlengths above 8 m. Use 804405 for shorter pathlengths.

Upscale Grating Set - 4500 MkIII

AMETEK Land

AMETEK Land item no. 804367 Adjustment gratings for 4500 MkIII upscale filter

4500 MkIII External Zero Device

AMETEK Land

AMETEK Land item no. 807141 External zero device for 4500 MkIII. Requires adjustment before use. Must be configured before use.

4500 MKIII cal stand replacement PSU kit

AMETEK Land

AMETEK Land item no. 811633 Replacement power supply for 4500 MkIII off-stack calibration.

Customers Also Viewed

FGA Probe Flange Gasket

AMETEK Land Item No. 702.428 FGA Probe Flange Gasket

Recommended Spare Parts Kit - 4650-PM

AMETEK Land

AMETEK Land item no. 810621

Air Hose (ID 38mm) Price Per Metre

AMETEK Land

AMETEK Land item no. 306.046 Flexible air hoise for 4500 MkIII.

VIRALERT 3 Imager - Imager with 80x64 thermal sensor and integrated 1280x960 visual sensor — Quick view

High accuracy thermal imaging camera, with 80x64 thermal sensor and integrated 1280x960 visual sensor, designed for temperature screening measurements with blackbody on single platform. Suitable as a...

Small Ball Joint (S4 B)

AMETEK Land

AMETEK Land item no. 150.560 The small ball mount can be used with the fiber-optic adapter (809901). It can be used with any standard tripod or using a 1/4” UNC bolt to a surface.

LSP Basic Mounting Plate

AMETEK Land

AMETEK Land item no. 031.520 The basic base plate is used in applications where an LSP-HD head is to be installed in environments where the ambient temperatures are within the recommended operating...

Air Pump Linear 115V 60Hz

AMETEK Land

AMETEK Land item no. 801387

Filter Replacement Kit - 4650-PM

AMETEK Land

AMETEK Land item no. 810630

Strategic Spare Parts Kit - 4650-PM

AMETEK Land

AMETEK Land item no. 810622

4750-PM Audit unit 300 mg/m3

AMETEK Land

AMETEK Land item no. 813571

4750-PM Backscatter PM-CEMS

AMETEK Land

AMETEK Land item no. 813484 All systems include: EN 15267-3 Approval by TUVdotCOM Laser back-scattering sensor and Integrated electronic controller.

Fail Safe Shutter Assembly

AMETEK Land

AMETEK Land item no. 800479 Mains powered shutter. Use 809068 for new installations.

Hose Clip

AMETEK Land

AMETEK Land item no. 318.238 Clip for 4500 MkIII air hose.

Zero Reflector 4500 MkIII (>=8 m Path)

AMETEK Land

AMETEK Land item no. 806963 Zero reflector for 4500 MkIII calibration unit, pathlengths above 8 m. Use 804405 for shorter pathlengths.

LANCOM Spare Catchpot & Bracket

AMETEK Land

AMETEK Land item no. 704.344 Moisture collector for Lancom 4.

3Way PCB Mount Sol/Valve 12V

AMETEK Land

AMETEK Land item no. 317.492 Valve for Lancom 4 zero calibration function.

Sinter Filter For Lancom Probe

AMETEK Land

AMETEK Land item no. 702.182 Probe-tip filter

Lancom 4 Spares Kit

AMETEK Land

AMETEK Land item no. 810539 Consumables kit includes: Probe tip filter Dust filter Acid gas filter Hose connector (2) O-ring for probe handle (2) PTFE membrane filter Catchpot gasket Fuse

Lancom Flow Probe 3.0 m

AMETEK Land

AMETEK Land item no. 703.473 S-type pitot tube for measurements of flue gas velocity. Requires hose 703.474 or 703.475.

VIRALERT 3 / 2 USB 3.0 to RJ45 Adaptor

VIRALERT

Using the USB 3.0 to RJ45 Adaptor, add an additional ethernet port to a laptop using one of its USB ports. Suitable for: VIRALERT 3 and VIRALERT 2 Systems. AMETEK Land item no. 814272

VIRALERT 3 / 3 Lite Tripod

VIRALERT

A tripod for installation on a flat surface to mount VIRALERT systems, VIRALERT 2 camera or calibration source. Suitable for: VIRALERT 3 and VIRALERT 3 Lite systems, VIRALERT 2 camera and VIRALERT 2...

Spare Actuator Digital Cable

AMETEK Land

AMETEK Land item no. 812033 M12 Ethernet M-F D Coded Cable Digital Power Cable 0.5M for SPOT Actuator - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network...

SPOT Actuator Handset + 5m Cable

AMETEK Land

The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

Power Supply (90W 24V)

AMETEK Land

AMETEK Land item no. 808441 24V power supply

S4 LP Light Air Purge

AMETEK Land

AMETEK Land item no. 091.811 S4 LP - The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research.Supplied with...

S4 Purge Assembly (USA)

AMETEK Land

AMETEK Land item no. 091.807

System 4 Connector & Cable 10 metre

AMETEK Land

AMETEK Land item no. 990.615 Fully assembled with ODU-Plug, Cable length: 10 Metres.

S4 Connector & 4m Cable

AMETEK Land

AMETEK Land item no. 029.673 For System 4 Thermometers.

Hose Union (38mm)

AMETEK Land

AMETEK Land item no. 150.760

FGA 0.5 m Probe

AMETEK Land

AMETEK Land item no. 702.424 Probe comprises a 19mm stainless steel tube with a 25·m sintered tip. Mounting flange is 3/4inch ANSI 150lb (flat-face, 98 od., 27.5 id., four 13.0 holes on 70 pcd...

Large Catchpot

AMETEK Land

AMETEK Land item no. 701.828 Clear catchpot for gas cooler.

2 Year Spares Kit (FGA900 series)

AMETEK Land

AMETEK Land item no. 703.646 6 pieces gas filter, 317.476 3 pieces Twin Autoprene Tube Assembly, 801402 6 pieces Replacement pump head, 317.553 2 pieces Replacement Fluoropolymer Diaphragm, 317.552 ...

FGA9xx CO Sensor Unit

AMETEK Land

AMETEK Land item no. 703.016 FGA9xx CO Sensor Unit Spent sensors contain toxic and acidic elements hazardous to the environment, and should be disposed of in accordance with prevailing hazardous...

Cyclops 390 L

AMETEK Land

Temperature Measurement Range: 450 to 1400°C / 842 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 3.9µmUse sapphire protection window (Part 803355 supplied with...