4500 MkIII External Zero Device

(No reviews yet) Write a Review

SKU:

807141

Shipping:

Free Shipping

Description
0 Reviews

Description

AMETEK Land item no. 807141

External zero device for 4500 MkIII. Requires adjustment before use. Must be configured before use.

View AllClose

0 Reviews

View AllClose

Transceiver Case for 4500 MkIII

AMETEK Land

AMETEK Land item no. 810800 Rear case (red) including membrane keypad.

Zero Reflector 4500 MkIII

AMETEK Land

AMETEK Land item no. 804405 Zero reflector for 4500 MkIII calibration unit, pathlengths below 8 m

Zero Reflector 4500 MkIII (>=8 m Path)

AMETEK Land

AMETEK Land item no. 806963 Zero reflector for 4500 MkIII calibration unit, pathlengths above 8 m. Use 804405 for shorter pathlengths.

4500 MkIII Zero Cal Aperture Set

AMETEK Land

AMETEK Land item no. 804470 Apertures and gratings for 4500 MkIII zero reflector.

Sinter Filter For Lancom Probe

AMETEK Land

AMETEK Land item no. 702.182 Probe-tip filter

Cyclops 390 L

AMETEK Land

Temperature Measurement Range: 450 to 1400°C / 842 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 3.9µmUse sapphire protection window (Part 803355 supplied with...

M10 Full Nut (set of 3)

AMETEK Land

AMETEK Land item no. 804561 Set of plain nuts for 4500 MkIII flange. Sufficient for one flange.

4500 MkIII Calibration Stand Kit

AMETEK Land

AMETEK Land item no. 809807 Calibration stands and power supply for off-stack adjustment of 4500 mkIII. Used for off-stack calibration.

1.0 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.384 Not to be used for gas sampling.

Filter Element for Plate Mtd Blower

AMETEK Land

AMETEK Land item no.317.561 Replacement filter for purge blower

FGA 1.0 m Probe

AMETEK Land

AMETEK Land item no.702.759 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C

Cyclops 160 L

AMETEK Land

AMETEK Land item no. 809561 Temperature Measurement Range: 200 to 1400°C / 392 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 1.6µm with advanced spectral...

1yr Consumable Parts, Small Blower- 4650

AMETEK Land

AMETEK Land item no. 810627

Recommended Spares Kit MC - 4650-PM

AMETEK Land

AMETEK Land item no. 810623

Model 4500 MkIII Panel-mount CRU

AMETEK Land

AMETEK Land item no. 805585 Spare PLC for 805583 and 805584

M12 Nyloc Nuts (Kit of 3)

AMETEK Land

AMETEK Land item no. 808904 Set of locking nuts for 4500 MkII+ flange. Sufficient for one flange.

LANCOM Low CO Sensor

AMETEK Land

AMETEK Land item no. 703.236 Standard carbon monoxide sensor for Lancom III and Lancom 4

Lancom 4 - Portable Flue Gas Analyser

AMETEK Land

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

Male Adaptor 10mm Tube - 1" BSP (M) PLtd

AMETEK Land

AMETEK Land item no. 150.786 Compressed air inlet adaptor (male G1 to 10mm hose connector).

Air Purge (S4P)

AMETEK Land

AMETEK Land item no. 091.561 Industrial air purge for System 4 pyrometers. (Mounts to 091.812 and 091.560)

4 way M12 to RJ45 Cable (0.5m)

AMETEK Land

AMETEK Land item no. 805023 Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug, Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug

Ceramic Filter For UA Probe

AMETEK Land

AMETEK Land item no. 323.270

FGA Main BOARD Tested

AMETEK Land

AMETEK Land item no.805093 Mill/Silowatch and FGA Main Board (Replaces 702.613)

4750-PM Display LED Segments

AMETEK Land

AMETEK Land item no. 813558

4750-PM Audit unit 300 mg/m3

AMETEK Land

AMETEK Land item no. 813571

STUD M10x110mm LONG ST ST (Set of 3)

AMETEK Land

AMETEK Land item no. 809645 Set of studs for 4500 MkIII flange. Sufficient for one flange.

Probe Locator with Lock Screw

AMETEK Land

AMETEK Land item no. 318.433 Cone for probe tube.

Lancom Flow Probe 1.2 m

AMETEK Land

AMETEK Land item no. 703.471 S-type pitot tube for measurements of flue gas velocity. Requires hose 703.474 or 703.475.

Clear Protection Window - Cyclops (not C390)

AMETEK Land

AMETEK Land item no. 802061

Power Supply Unit for I/O Processor

AMETEK Land

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

DRYSAMPLER Probe Body

AMETEK Land

AMETEK Land item no. 323.350

Tested Analogue PCB - Lancom 4

AMETEK Land

AMETEK Land item no. 806584 Replacement Lancom 4 main circuit board.

LANCOM SO2 Sensor

AMETEK Land

AMETEK Land item no. 703.241 Sulfur dioxide sensor for Lancom III and Lancom 4

Disposable Filter High Efficiency 0.1um

AMETEK Land

AMETEK Land item no. 812325 Fine particle filter for use with high-temperature probe. Filter 812325 is an ultra-fine filter which is useful in applications where 317.476 allows material to pass...

Blower Hose Clip

AMETEK Land

AMETEK Land item no. 318.068 Hose clip for purge blower

9100 Spare Source Heater

AMETEK Land

AMETEK Land item no.812105 Replacement for obsolete infrared source 703.579. Includes an upgrade to firmware V1.1.

S5 Actuator Analogue Cable 0.5m M-F — Quick view

Spare Actuator Analog Cable

AMETEK Land

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

1 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801523 4500 MkIII retroreflector element, pathlength 1.09 to 2.02 m (43 to 79 inches).

Lancom Probe Handle & 3m Hose

AMETEK Land

AMETEK Land item no. 703.128 Probe handle. Requires probe tube.

Lens Cover for Cyclops

AMETEK Land Item No. 802083 Lens cover for Cyclops

Landmark Basic Processor (LMB)

AMETEK Land

AMETEK Land item no. 092.506 A simple back-of-panel DIN-rail mounted signal processing unit designed for system builders and OEMs.

Blower 110V 60Hz, cover, Y-pc, P-switch

AMETEK Land

AMETEK Land Item No.810283 Recommended for 4500 MkIII. Complete system including weather cover, Y-piece and pressure switch. One blower with Y-piece is sufficient for all normal applications.

M16 8 Way to M16 12 Way Analogue Cable 0.3m

AMETEK Land

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.

M12-RJ45 Cable 5m Straight Connector — Quick view

SPOT M12 to RJ45 Digital Cable

AMETEK Land

AMETEK Land item no. 807944 / 807945 / 812354 / 807946 Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC...

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

10mm-3/8" UNION Compression Fitting

AMETEK Land

AMETEK Land item no. 150.741 For 3/8" bar to 10mm tube fittings, pressure resistance 10 bar.

S4 Purge Assembly (USA)

AMETEK Land

AMETEK Land item no. 091.807

LSP Purge / Cooling Plate

AMETEK Land

AMETEK Land item no. 031.496 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

LSP-HD PSU Module

AMETEK Land

AMETEK Land item no. 805037 A terminal box which allows connection of the incoming LSP-HD connection cable via an M12 industrial ethernet port, incoming mains power and the downstream data connection...

Cable Assembly Standard Ethernet 30m

AMETEK Land

AMETEK Land item no. 807087 Connection cable between the LSP-HD head and the LSP Power Supply unit; pre-terminated with M12 industrial ethernet connectors this single cable provides both data and...

Autoprene Tube for Peristaltic Pump

AMETEK Land

AMETEK Land item no. 317.480 Single tube for old peristaltic pump.

1/4"OD x 3/16" ID PTFE Tube

AMETEK Land

AMETEK Land item no. 306.057 Thin-wall Teflon tube.

2 Year Spares Kit (FGA900 series)

AMETEK Land

AMETEK Land item no. 703.646 6 pieces gas filter, 317.476 3 pieces Twin Autoprene Tube Assembly, 801402 6 pieces Replacement pump head, 317.553 2 pieces Replacement Fluoropolymer Diaphragm, 317.552 ...

Spare gasket kit for 099.392

AMETEK Land

AMETEK Land item no. 809926 For Millwatch probe 099.392

4500 MkIII External Zero Device

Write a Review

AMETEK Land

4500 MkIII External Zero Device

Description

0 Reviews

Related Products