The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281
S4 LP - The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research.Supplied with mounting bracket and lock nut as...
Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC. AMETEK Land item no. 812033
If the Actuator ambient temperature exceeds 50 °C / 122 °F, overheating is prevented in hot industrial environments with the water cooled Cooling Plate. Positioned between the mounting...
The SPOT Actuator is a smart-intelligent motorised scanning unit, including a webserver for easy access, configuration and monitoring. Three different scanning modes cover a wide range of...
Mounted with a purge to protect the lens against build up of dust which could result in obscuring the line of sight. Come complete with bracket and lock nut. AMETEK Land item no. 808015
PCB connection board for use with the above cable selection. The customer is free to wire to the 24V power supply of their choice. AMETEK Land item no. 807942
20m Power over Ethernet cable, fitted with M12 connector for the instrument and RJ45 for connection to network switch or control PC. AMETEK Land item no. 807945
Panel Mount Housing for 4 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC Connection Output: 1 mV / deg and 0 (4) - 20 mA System accuracy: 0.12% of reading...
Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System accuracy: 0.12% of reading...
Panel Mount Housing for 2 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System accuracy: 0.12% of reading...
Panel Mount Housing for 1 IR Thermometer Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System accuracy: 0.12% of reading Display:...
AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating temperature: -10 to 70 °...
Beckhoff I/O Processor 2: Provides analog and digital I / Os for a maximum of 8 LSP-HD scanners, Type: DIN Rail Industrial PC, Interface: 2 x RJ-45 diagnostic- LEDs: Power, LAN1 link, LAN2 link...
The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range of 60 to 120°C/140 to...
The basic base plate is used in applications where an LSP-HD head is to be installed in environments where the ambient temperatures are within the recommended operating range of the instrument and...
Connection cable between the LSP-HD head and the LSP Power Supply unit; pre-terminated with M12 industrial ethernet connectors this single cable provides both data and Power-over-Ethernet connections...
