Male Adaptor 10mm Tube - 1" BSP (M) PLtd

Related Products

Lancom 0.3 m Probe Tube

AMETEK Land

AMETEK Land item no. 702.141 Stainless steel probe tube and filter. Maximum temperature 600 C (1112 °F). For use with 703.128 / 703.163 / 323.173 / 323.174

Lancom 1.0 m Probe Tube

AMETEK Land

AMETEK Land item no. 702.205 Stainless steel probe tube and filter. Maximum temperature 600 C (1112 °F). For use with 703.128 / 703.163 / 323.173 / 323.175

Lancom 1.5 m Probe Tube

AMETEK Land

AMETEK Land item no. 702.206 Stainless steel probe tube and filter. Maximum temperature 600 C (1112 °F). For use with 703.128 / 703.163 / 323.173 / 323.176

Lancom 3.0 m Probe Tube

AMETEK Land

AMETEK Land item no. 702.207 Stainless steel probe tube and filter. Maximum temperature 600 C (1112 °F). For use with 703.128 / 703.163 / 323.173 / 323.178

Reinforced Sample Tube (15 m) — Quick view

Customers Also Viewed

IP 68 Plug (For S4 Cable Assembly)

AMETEK Land

AMETEK Land item no. 212.372

9100 Spare Source Heater

AMETEK Land

AMETEK Land item no.812105 Replacement for obsolete infrared source 703.579. Includes an upgrade to firmware V1.1.

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

Air Purge (S4P)

AMETEK Land

AMETEK Land item no. 091.561 Air Purge for System 4 Style Thermometers.

Cyclops 390 L

AMETEK Land

Temperature Measurement Range: 450 to 1400°C / 842 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 3.9µmUse sapphire protection window (Part 803355 supplied with...

Cyclops 160 L

AMETEK Land

AMETEK Land item no. 809561 Temperature Measurement Range: 200 to 1400°C / 392 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 1.6µm with advanced spectral...

Model 4500 MkIII Panel-mount CRU

AMETEK Land

AMETEK Land item no. 805585 Spare PLC for 805583 and 805584

Tested Analogue PCB - Lancom 4

AMETEK Land

AMETEK Land item no. 806584 Replacement Lancom 4 main circuit board.

Lancom Probe Handle & 3m Hose

AMETEK Land

AMETEK Land item no. 703.128 Probe handle. Requires probe tube.

Clear Protection Window - Cyclops (not C390)

AMETEK Land

AMETEK Land item no. 802061

Filter Element for Plate Mtd Blower

AMETEK Land

AMETEK Land item no.317.561 Replacement filter for purge blower

M12-RJ45 Cable 5m Straight Connector — Quick view

SPOT M12 to RJ45 Digital Cable

AMETEK Land

AMETEK Land item no. 807944 / 807945 / 812354 / 807946 Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC...

Power Supply Unit for I/O Processor

AMETEK Land

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

4 way M12 to RJ45 Cable (0.5m)

AMETEK Land

AMETEK Land item no. 805023 Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug, Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug

FGA 1.0 m Probe

AMETEK Land

AMETEK Land item no.702.759 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C

1yr Consumable Parts, Small Blower- 4650

AMETEK Land

AMETEK Land item no. 810627

Recommended Spares Kit MC - 4650-PM

AMETEK Land

AMETEK Land item no. 810623

4750-PM Display LED Segments

AMETEK Land

AMETEK Land item no. 813558

STUD M10x110mm LONG ST ST (Set of 3)

AMETEK Land

AMETEK Land item no. 809645 Set of studs for 4500 MkIII flange. Sufficient for one flange.

4500 MkIII Calibration Stand Kit

AMETEK Land

AMETEK Land item no. 809807 Calibration stands and power supply for off-stack adjustment of 4500 mkIII. Used for off-stack calibration.

DRYSAMPLER Probe Body

AMETEK Land

AMETEK Land item no. 323.350

LANCOM SO2 Sensor

AMETEK Land

AMETEK Land item no. 703.241 Sulfur dioxide sensor for Lancom III and Lancom 4

LANCOM Low CO Sensor

AMETEK Land

AMETEK Land item no. 703.236 Standard carbon monoxide sensor for Lancom III and Lancom 4

1.0 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.384 Not to be used for gas sampling.

SPOT Actuator Cooling Plate Assembly

AMETEK Land

If the Actuator ambient temperature exceeds 50 °C / 122 °F, overheating is prevented in hot industrial environments with the water cooled Cooling Plate. Positioned between the mounting...

M16 8 Way to M16 12 Way Analogue Cable 0.3m

AMETEK Land

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

Small Pan & Tilt Bracket

AMETEK Land

AMETEK Land item no. 806761 This dual axis mounting bracket can be used with the water cooled mounting where the mounting front flange is inappropriate.

SPOT Light Purge

AMETEK Land

AMETEK Land item no. 808015 The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research. Supplied with mounting...

Analog Connection PCB Kit

AMETEK Land

AMETEK Land item no. 807942 PCB connection board for use with the above cable selection. The customer is free to wire to the 24V power supply of their choice.

M16-Free 8 Way Cable 5m Str Connector — Quick view

SPOT M16 to Open Analog Cable

AMETEK Land

AMETEK Land item no. 807950 / 807951 / 812353 / 807952 One end fitted with an M16 connector for connection with the instrument, the other end an 8 way stripped leads cable. Sizes Available: 5m -...

Power Supply (90W 24V)

AMETEK Land

AMETEK Land item no. 808441 PSU unit for 808959

Industrial PoE Injector

AMETEK Land

AMETEK Land item no. 808959

Desktop PoE Injector

AMETEK Land

AMETEK Land item no. 810573

Small Ball Joint (S4 B)

AMETEK Land

AMETEK Land item no. 150.560 The small ball mount can be used with the fiber-optic adapter (809901). It can be used with any standard tripod or using a 1/4” UNC bolt to a surface.

Lab Fibre Optic Adaptor

AMETEK Land

AMETEK Land item no. 029.238 S4 F/O ADAPTOR.

S4 Fibre Optic Angle Bracket

AMETEK Land

AMETEK Land item no. 029.224 S4 ANGLE BRACKET F/O

Mounting Plate (S4 MP)

AMETEK Land

AMETEK Land item no. 029.263 S/A S4 LGE MTG ADAPTOR PLATE.

Mounting Shoe (S4 WF)

AMETEK Land

AMETEK Land item no. 029.547 S4 ASSY WATER COOLED PLATE WF.

S4 LP Light Air Purge

AMETEK Land

AMETEK Land item no. 091.811 S4 LP - The Light Purge is designed to keep the pyrometer lens clean, when installed in less-hostile environments such as light industry or research.Supplied with...