Flange Sealing Ring (small)

Related Products

NEOPRENE O-Ring BS009

AMETEK Land

AMETEK Land item no. 319.211 O-ring for Lancom probe handle.

Flange Sealing Ring (large)

AMETEK Land

AMETEK Land item no. 701.981 Viton rubber sealing ring for large standpipe 702.790.

Spherical Washer - Mount.Flange

AMETEK Land

AMETEK Land item no. 702.749 Set of plain nuts for 4500 MkII+ flange. Sufficient for one flange.

Flange Stud - 145 mm Long for FSS

AMETEK Land

AMETEK Land item no. 802823 Set of curved washers for 4500 MkII+ flange. Sufficient for one flange.

Small Pan & Tilt Bracket

AMETEK Land

AMETEK Land item no. 806761 This dual axis mounting bracket can be used with the water cooled mounting where the mounting front flange is inappropriate.

Customers Also Viewed

Standard Certificate of Calibration on New Instrument

AMETEK Land

Certificate provided with customer specified temperature span. If no span is specified, the span performed will be determined by set span ranges per instrument type. PLEASE ENTER THE TEMPERATURE SPAN...

1 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801523 4500 MkIII retroreflector element, pathlength 1.09 to 2.02 m (43 to 79 inches).

Zero Reflector 4500 MkIII

AMETEK Land

AMETEK Land item no. 804405 Zero reflector for 4500 MkIII calibration unit, pathlengths below 8 m

9100 Spare Source Heater

AMETEK Land

AMETEK Land item no.812105 Replacement for obsolete infrared source 703.579. Includes an upgrade to firmware V1.1.

LSP-HD PSU Module

AMETEK Land

AMETEK Land item no. 805037 A terminal box which allows connection of the incoming LSP-HD connection cable via an M12 industrial ethernet port, incoming mains power and the downstream data connection...

2 Year Spares Kit (FGA900 series)

AMETEK Land

AMETEK Land item no. 703.646 6 pieces gas filter, 317.476 3 pieces Twin Autoprene Tube Assembly, 801402 6 pieces Replacement pump head, 317.553 2 pieces Replacement Viton Diaphragm, 317.552

One Way Valve 1/8" BARBS POLYPROP

AMETEK Land

AMETEK Land item no. 801782 Red non-return valve.

4650-PM 24V DC 2A Power Supply

AMETEK Land

AMETEK Land item no. 810663

4650-PM Sensor PCB

AMETEK Land

AMETEK Land item no. 810636

Motor & Clutch - 4500 MkIII FSS

AMETEK Land

AMETEK Land item no. 809069 Spare for 809068

Rebuild Kit for Large Standpipe

AMETEK Land

AMETEK Land item no. 809700 Set of studs for 4500 MkII+ flange. Sufficient for one flange. Kit 809700 comprises 3 each 805884, 702.749, 802823, 112.511 (M12 nut), 316.055 (M12 washer) plus 1 qty...

4500 MkIII Retro 0.6m Pathlength

AMETEK Land

AMETEK Land item no. 804349 4500 MkIII retroreflector element, pathlength < 0.76 m (20 to 30 inches).

Zero Reflector 4500 MkIII (>=8 m Path)

AMETEK Land

AMETEK Land item no. 806963 Zero reflector for 4500 MkIII calibration unit, pathlengths above 8 m. Use 804405 for shorter pathlengths.

Connector Plate for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804542 Connector plate for bottom of 4500 MkIII transceiver

Eyepiece (Round Graticule) 4500 MkIII

AMETEK Land

AMETEK Land item no. 804283

Flange Sealing Ring (large)

AMETEK Land

AMETEK Land item no. 701.981 Viton rubber sealing ring for large standpipe 702.790.

LANCOM Low CO Sensor

AMETEK Land

AMETEK Land item no. 703.236 Standard carbon monoxide sensor for Lancom III and Lancom 4

Lens Number 110

AMETEK Land

AMETEK Land item no. 804041 215 mm fixed focus for measuring point diameter of 0.4 mm. Lens only available for the Cyclops 100

Blower Large 110V 60HZ 1PH

AMETEK Land

AMETEK Land item no. 317.610 Replacement blower motor 110 V 60 Hz for 9100

Lancom 4 - Portable Flue Gas Analyser

AMETEK Land

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

Spare Actuator Digital Cable

AMETEK Land

AMETEK Land item no. 812033 M12 Ethernet M-F D Coded Cable Digital Power Cable 0.5M for SPOT Actuator - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network...

SPOT Actuator Cooling Plate Assembly

AMETEK Land

If the Actuator ambient temperature exceeds 50 °C / 122 °F, overheating is prevented in hot industrial environments with the water cooled Cooling Plate. Positioned between the mounting...

SPOT Actuator Handset + 5m Cable

AMETEK Land

The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281

M16 8 Way to M16 12 Way Analogue Cable 0.3m

AMETEK Land

AMETEK Land item no. 808084 The M16 8 way to M16 12 way connector allows for replacement of non System 4 instruments.

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

SPOT Mounting Bracket & Lock Nut

AMETEK Land

AMETEK Land item no. 810487

SD Memory Card (Industrial Grade)

AMETEK Land

AMETEK Land item no. 811532 SD Memory Card (Industrial Grade)

Analog Connection PCB Kit

AMETEK Land

AMETEK Land item no. 807942 PCB connection board for use with the above cable selection. The customer is free to wire to the 24V power supply of their choice.

M16-Free 8 Way Cable 5m Str Connector — Quick view

SPOT M16 to Open Analog Cable

AMETEK Land

AMETEK Land item no. 807950 / 807951 / 812353 / 807952 One end fitted with an M16 connector for connection with the instrument, the other end an 8 way stripped leads cable. Sizes Available: 5m -...

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

LMG MkII 1100 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812066 Panel Mount Housing for 2 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

LMG MkII 1000 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812065 Panel Mount Housing for 1 IR Thermometer Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

Small Ball Joint (S4 B)

AMETEK Land

AMETEK Land item no. 150.560 The small ball mount can be used with the fiber-optic adapter (809901). It can be used with any standard tripod or using a 1/4” UNC bolt to a surface.

S4 Mounting kit JCP-AF

AMETEK Land

AMETEK Land item no. 806993

Large Ball Joint (S4 LB)

AMETEK Land

AMETEK Land item no. 030.566 LARGE BALL MOUNT ASSY S4.

Mounting Shoe (S4 WF)

AMETEK Land

AMETEK Land item no. 029.547 S4 ASSY WATER COOLED PLATE WF.

10mm-3/8" UNION Compression Fitting

AMETEK Land

AMETEK Land item no. 150.741 For 3/8" bar to 10mm tube fittings, pressure resistance 10 bar.

Air Purge (S4P)

AMETEK Land

AMETEK Land item no. 091.561 Air Purge for System 4 Style Thermometers.

S4 Connector & Cable 35m 6 Cores

AMETEK Land

AMETEK Land item no. 800589 For System 4 Thermometers fully assembled with ODU-Plug.

LSP 15m Connection Cable

AMETEK Land

AMETEK Land item no. 031.402 Required to connect LSP Head to LSP Processor. Permits instrument operation in max ambient of 60°C.

Hose Union (38mm)

AMETEK Land

AMETEK Land item no. 150.760

Blower Weather Proof Cover

AMETEK Land

AMETEK Land item no. 704.374 Weather cover for plate mounted blower

Blower Air Pre-Filter

AMETEK Land

AMETEK Land item no. 317.560 Inertial prefilter for plate mounted blower.

I/O Processor 1 - IN(4D/2A) OUT(4D/4A)

AMETEK Land

AMETEK Land item no. 812835 *** new part number 812835 *** Beckhoff I/O Processor 1 Inputs: 4 digital, 2 analogue. Outputs: 4 digital, 4 analogue Provides analog and digital I/Os for a maximum of 8...

LSP Purge Cooling System

AMETEK Land

AMETEK Land item no. 800095 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

LSP Vertical Mount

AMETEK Land

AMETEK Land item no. 031.438 For mounting LSP Head to walls.

LSP Purge / Cooling Plate

AMETEK Land

AMETEK Land item no. 031.496 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

M12 Phoenix Connector (4 pin)

AMETEK Land

AMETEK Land item no. 805199

15m M12 to M12 Ethernet Cable - HT

AMETEK Land

AMETEK Land item no. 804977 Connection cable between the LSP-HD head and the LSP Power Supply unit; pre-terminated with M12 industrial ethernet connectors this single cable provides both data and...

FGA 1.5 m Probe

AMETEK Land

AMETEK Land item no.702.760 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C

Flange Sealing Ring (small)

Write a Review

AMETEK Land

Flange Sealing Ring (small)

Description

0 Reviews

Related Products