FGA 1.0 m Probe

Related Products

Lancom 1.0 m Probe Tube

AMETEK Land

AMETEK Land item no. 702.205 Stainless steel probe tube and filter. Maximum temperature 600 C (1112 °F). For use with 703.128 / 703.163 / 323.173 / 323.175

1.0 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.384 Not to be used for gas sampling.

AMETEK Land item no. 702.424 Probe comprises a 19mm stainless steel tube with a 25·m sintered tip. Mounting flange is 3/4inch ANSI 150lb (flat-face, 98 od., 27.5 id., four 13.0 holes on 70 pcd. FGA...

FGA 1.5 m Probe

AMETEK Land

AMETEK Land item no.702.760 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C

FGA Probe Flange Gasket

AMETEK Land Item No. 702.428 FGA Probe Flange Gasket

Customers Also Viewed

Clear Protection Window - Cyclops (not C390)

AMETEK Land

AMETEK Land item no. 802061

4 way M12 to RJ45 Cable (0.5m)

AMETEK Land

AMETEK Land item no. 805023 Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug, Connection 1: Ethernet M12 connector, Connection 2: RJ 45 Plug

Cyclops 390 L

AMETEK Land

Temperature Measurement Range: 450 to 1400°C / 842 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 3.9µmUse sapphire protection window (Part 803355 supplied with...

Cyclops 160 L

AMETEK Land

AMETEK Land item no. 809561 Temperature Measurement Range: 200 to 1400°C / 392 to 2552°FWith Bluetooth & USB connectivity. Spectral response of 1.6µm with advanced spectral...

Model 4500 MkIII Panel-mount CRU

AMETEK Land

AMETEK Land item no. 805585 Spare PLC for 805583 and 805584

LANCOM SO2 Sensor

AMETEK Land

AMETEK Land item no. 703.241 Sulfur dioxide sensor for Lancom III and Lancom 4

1.0 m Smoke Probe & Hose

AMETEK Land

AMETEK Land item no. 703.384 Not to be used for gas sampling.

Ceramic Filter For UA Probe

AMETEK Land

AMETEK Land item no. 323.270

1yr Consumable Parts, Small Blower- 4650

AMETEK Land

AMETEK Land item no. 810627

LANCOM Low CO Sensor

AMETEK Land

AMETEK Land item no. 703.236 Standard carbon monoxide sensor for Lancom III and Lancom 4

Lancom Probe Handle & 3m Hose

AMETEK Land

AMETEK Land item no. 703.128 Probe handle. Requires probe tube.

S5 Actuator Analogue Cable 0.5m M-F — Quick view

Spare Actuator Analog Cable

AMETEK Land

AMETEK Land item no. 812037 S5 Actuator Analogue Cable 0.5m M-F for SPOT Actuator. Eight conductor analog connector cable one end terminated to an 8-way SPOT connector, the other end stripped flying...

Male Adaptor 10mm Tube - 1" BSP (M) PLtd

AMETEK Land

AMETEK Land item no. 150.786 Compressed air inlet adaptor (male G1 to 10mm hose connector).

Recommended Spares Kit MC - 4650-PM

AMETEK Land

AMETEK Land item no. 810623

4750-PM Display LED Segments

AMETEK Land

AMETEK Land item no. 813558

M12 Nyloc Nuts (Kit of 3)

AMETEK Land

AMETEK Land item no. 808904 Set of locking nuts for 4500 MkII+ flange. Sufficient for one flange.

M10 Full Nut (set of 3)

AMETEK Land

AMETEK Land item no. 804561 Set of plain nuts for 4500 MkIII flange. Sufficient for one flange.

4500 MkIII External Zero Device

AMETEK Land

AMETEK Land item no. 807141 External zero device for 4500 MkIII. Requires adjustment before use. Must be configured before use.

Tested Analogue PCB - Lancom 4

AMETEK Land

AMETEK Land item no. 806584 Replacement Lancom 4 main circuit board.

Sinter Filter For Lancom Probe

AMETEK Land

AMETEK Land item no. 702.182 Probe-tip filter

Filter Element for Plate Mtd Blower

AMETEK Land

AMETEK Land item no.317.561 Replacement filter for purge blower

9100 Spare Source Heater

AMETEK Land

AMETEK Land item no.812105 Replacement for obsolete infrared source 703.579. Includes an upgrade to firmware V1.1.

Air Purge (S4P)

AMETEK Land

AMETEK Land item no. 091.561 Industrial air purge for System 4 pyrometers. (Mounts to 091.812 and 091.560)

IP 68 Plug (For S4 Cable Assembly)

AMETEK Land

AMETEK Land item no. 212.372 Connector for System 4 pyrometers. (Cable side)

FGA Main BOARD Tested

AMETEK Land

AMETEK Land item no.805093 Mill/Silowatch and FGA Main Board (Replaces 702.613)

4750-PM Audit unit 300 mg/m3

AMETEK Land

AMETEK Land item no. 813571

STUD M10x110mm LONG ST ST (Set of 3)

AMETEK Land

AMETEK Land item no. 809645 Set of studs for 4500 MkIII flange. Sufficient for one flange.

4500 MkIII Calibration Stand Kit

AMETEK Land

AMETEK Land item no. 809807 Calibration stands and power supply for off-stack adjustment of 4500 mkIII. Used for off-stack calibration.

DRYSAMPLER Probe Body

AMETEK Land

AMETEK Land item no. 323.350

Lancom Flow Probe 1.2 m

AMETEK Land

AMETEK Land item no. 703.471 S-type pitot tube for measurements of flue gas velocity. Requires hose 703.474 or 703.475.

Blower Hose Clip

AMETEK Land

AMETEK Land item no. 318.068 Hose clip for purge blower

Power Supply Unit for I/O Processor

AMETEK Land

AMETEK Land item no. 805953 AC PSU 120W 24V Traco TCL120-124 for LAND I/O processor, ARC- imager, Input voltage: 240V AC 80/50/60 Hz, Output Voltage: 24-28 V DC (5A), Mounting: DIN Rail, Operating...

Calibration Rig Adaptor - SOLOnet

AMETEK Land

AMETEK Land item no. 801486 Calibration Rig Adaptor - SOLOnet

Probe Locator with Lock Screw

AMETEK Land

AMETEK Land item no. 318.433 Cone for probe tube.

Disposable Filter High Efficiency 0.1um

AMETEK Land

AMETEK Land item no. 812325 Fine particle filter for use with high-temperature probe. Filter 812325 is an ultra-fine filter which is useful in applications where 317.476 allows material to pass...

4650-PM Detector Assy

AMETEK Land

AMETEK Land item no. 810638

4750-PM Replacement Lens

AMETEK Land

AMETEK Land item no. 813564

4750-PM Detector

AMETEK Land

AMETEK Land item no. 813561

Motor & Clutch - 4500 MkIII FSS

AMETEK Land

AMETEK Land item no. 809069 Spare for 809068

Case Clip Set for 4500 MkIII

AMETEK Land

AMETEK Land item no. 804390 Stainless steel clips fasten transceiver or retro to purge mount.

USB A to USB B Cable 2m

AMETEK Land

AMETEK Land item no. 806884 Lancom 4 USB data cable.

High Temperature Probe Tube 0.3 m

AMETEK Land

AMETEK Land item no. 305.001 Ceramic tube for use with high-temperature probe handle. For temperatures up to 1400 °C (2552 °F). Use with handle 704.199

Blower 110V 60Hz, cover, Y-pc, P-switch

AMETEK Land

AMETEK Land Item No.810283 Recommended for 4500 MkIII. Complete system including weather cover, Y-piece and pressure switch. One blower with Y-piece is sufficient for all normal applications.

Lancom 4 - Portable Flue Gas Analyser

AMETEK Land

AMETEK Land item no. 807606 Lancom 4 is a portable flue gas analyzer featuring a robust case, long battery life and onboard data logging. Lancom 4 delivers the complete solution for portable flue gas...

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

M12-RJ45 Cable 5m Straight Connector — Quick view

SPOT M12 to RJ45 Digital Cable

AMETEK Land

AMETEK Land item no. 807944 / 807945 / 812354 / 807946 Digital Power Cable - A specific length cable with an M12PoE connector, the other end a RJ45 fitting for a network control switch or Control PC...

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

S4 F/O QR Purge/Mtg Bracket

AMETEK Land

AMETEK Land item no. 029.873 The adapter, air purge and mounting bracket assembly attaches to the optic head, and provides mounting using the single hole in the base of the bracket. Alternatively,...