13 Prism Super Retro for 4500

(No reviews yet) Write a Review

SKU:

801526

Shipping:

Free Shipping

Description
0 Reviews

Description

AMETEK Land item no. 801526

4500 MkIII retroreflector element, pathlength > 10.6 m (418 to 600 inches).

View AllClose

0 Reviews

View AllClose

4500 MkIII Retro Rear Cover

AMETEK Land

AMETEK Land item no. 810801 Red retro mount. Does not include retroreflector.

4500 MkIII Retro 0.6m Pathlength

AMETEK Land

AMETEK Land item no. 804349 4500 MkIII retroreflector element, pathlength < 0.76 m (20 to 30 inches).

1 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801523 4500 MkIII retroreflector element, pathlength 1.09 to 2.02 m (43 to 79 inches).

3 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801524 4500 MkIII retroreflector element, pathlength 2.03 to 4.29 m ( 80 to 169 inches).

7 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801525 4500 MkIII retroreflector element, pathlength 4.3 to 10.6 m (170 to 417 inches).

3 Prism Super Retro for 4500

AMETEK Land

AMETEK Land item no. 801524 4500 MkIII retroreflector element, pathlength 2.03 to 4.29 m ( 80 to 169 inches).

4500 MkIII 19" Rack Mount CRU with I/O

AMETEK Land

AMETEK Land item no. 805583 Remote display and diagnostics for 4500 MkIII opacity monitor. Includes status relays and 4-20 mA outputs.

SPOT Water Cooled Mounting

AMETEK Land

AMETEK Land item no. 808100 Spot purge and water cooled mounting. Recommended for use with Pan and Tilt Bracket 806761 This incorporates the integrated Protection Jacket and Purge plus the hinged...

Power Supply (90W 24V)

AMETEK Land

AMETEK Land item no. 808441 PSU unit for 808959

S4 Fibre Optic Angle Bracket

AMETEK Land

AMETEK Land item no. 029.224 S4 ANGLE BRACKET F/O

Mounting Shoe (S4 WF)

AMETEK Land

AMETEK Land item no. 029.547 S4 ASSY WATER COOLED PLATE WF.

IP 68 Plug (For S4 Cable Assembly)

AMETEK Land

AMETEK Land item no. 212.372

CO Sensor for Millwatch

AMETEK Land

AMETEK Land item no. 702.818 Standard Mill/Silowatch CO sensor.

4650-PM O Ring Entry/Exit Baffle

AMETEK Land

AMETEK Land item no. 810650

4650-PM spare HT probe (500C Horizontal)

AMETEK Land

AMETEK Land item no. 810615

1yr Consumable Parts, Air Filter- 4650PM

AMETEK Land

AMETEK Land item no. 810631

4750-PM Audit unit 150 mg/m3 — Quick view

Fail-safe Shutter - 4500 MkIII

AMETEK Land

AMETEK Land item no. 809068

4500 MkIII 4 channel CRU+I/O ZC7985

AMETEK Land

AMETEK Land item no. 812118 Control Room Unit with I/O for use with up to 4 LAND 4500MkIII opacimeter..

Flange Stud - 145 mm Long for FSS

AMETEK Land

AMETEK Land item no. 802823 Set of curved washers for 4500 MkII+ flange. Sufficient for one flange.

Spherical Washer (set of 3)

AMETEK Land

AMETEK Land item no. 804557 Set of curved washers for 4500 MkIII flange. Sufficient for one flange.

4500 MkII+ to 4500 MkIII Adaptor Kit

AMETEK Land

AMETEK Land item no. 804248 Adaptor flange allows 4500 MkIII to mount to 4500 MkII+ standpipe. Two needed for each instrument.

AFU-APS-I/O - 4500 MkIII

AMETEK Land

AMETEK Land item no. 809825 Auxiliary power supply, auxiliary function unit and 4-20 mA output card for 4500 MkIII.

4500 MKIII cal stand replacement PSU kit

AMETEK Land

AMETEK Land item no. 811633 Replacement power supply for 4500 MkIII off-stack calibration.

4500 MkIII Calibration Stand Kit

AMETEK Land

AMETEK Land item no. 809807 Calibration stands and power supply for off-stack adjustment of 4500 mkIII. Used for off-stack calibration.

4500 MkIII External Zero Device

AMETEK Land

AMETEK Land item no. 807141 External zero device for 4500 MkIII. Requires adjustment before use. Must be configured before use.

4500 MkIII 19" Rack Mount CRU no I/O

AMETEK Land

AMETEK Land item no. 805584 Remote display and diagnostics for 4500 MkIII opacity monitor.

Smoke Filter Paper Packet of 200

AMETEK Land

AMETEK Land item no. 701.616 Smoke spot filters for use with Lancom 4 smoke probe.

Cyclops 055 L

AMETEK Land

AMETEK Land item no.809558 Temperature Measurement Range: 1000 to 2000 °C / 1832 to 3632 °F With Bluetooth & USB connectivity. Spectral response of 0.55 µm Use clear protection...

SPOT Actuator Handset + 5m Cable

AMETEK Land

The Actuator remote control gives the operator a direct access, whilst a full remote control is available over the Modbus interface. AMETEK Land item no. 812281

SPOT to System 4 Adaptor Kit

AMETEK Land

AMETEK Land item no. 808018 The System 4 to SPOT Adapter Kit allows you to install an AMETEK Land SPOT Pyrometer in an S4-J. This means that you can replace an existing System 4 Pyrometer with an...

Small Pan & Tilt Bracket

AMETEK Land

AMETEK Land item no. 806761 This dual axis mounting bracket can be used with the water cooled mounting where the mounting front flange is inappropriate.

LMG MkII 1111 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812068 Panel Mount Housing for 4 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC Connection Output: 1 mV / deg and 0 (4) - 20 mA System...

LMG MkII 1110 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812067 Panel Mount Housing for 3 IR Thermometers Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

LMG MkII 1000 Landmark Graphic Processor

AMETEK Land

AMETEK Land item no. 812065 Panel Mount Housing for 1 IR Thermometer Dimensions: H144 x W190 x D160 mm Power supply via external 24V DC connection Output: 1 mV / deg and 0 (4) - 20 mA System...

Small Ball Joint (S4 B)

AMETEK Land

AMETEK Land item no. 150.560 The small ball mount can be used with the fiber-optic adapter (809901). It can be used with any standard tripod or using a 1/4” UNC bolt to a surface.

Back Cap (S4C)

AMETEK Land

AMETEK Land item no. 091.562 End Cap for System 4 Style Thermometers.

10mm-3/8" UNION Compression Fitting

AMETEK Land

AMETEK Land item no. 150.741 For 3/8" bar to 10mm tube fittings, pressure resistance 10 bar.

S4 Connector & 4m Cable

AMETEK Land

AMETEK Land item no. 029.673 For System 4 Thermometers.

I/O Processor 2 - IN(8D/4A) OUT(12D/12A)

AMETEK Land

AMETEK Land item no. 812836 Beckhoff I/O Processor 2: Provides analog and digital I / Os for a maximum of 8 LSP-HD scanners, Type: DIN Rail Industrial PC, Interface: 2 x RJ-45 diagnostic- LEDs:...

AMETEK Land item no. 800095 The water cooled, air purged base plate is used in applications where an LSP scanner is to be installed into environments where the ambient temperatures are in the range...

LSP Basic Mounting Plate

AMETEK Land

AMETEK Land item no. 031.520 The basic base plate is used in applications where an LSP-HD head is to be installed in environments where the ambient temperatures are within the recommended operating...

ANNUNCIATOR 24V DC

AMETEK Land

AMETEK Land item no. 199.003

15m M12 to M12 Ethernet Cable - HT

AMETEK Land

AMETEK Land item no. 804977 Connection cable between the LSP-HD head and the LSP Power Supply unit; pre-terminated with M12 industrial ethernet connectors this single cable provides both data and...

Reinforced Sample Tube (15 m)

AMETEK Land

AMETEK Land item no.702.728

FGA 1.5 m Probe

AMETEK Land

AMETEK Land item no.702.760 FGA and Silowatch probe Sample temperatures 120 °C to 600 °C

Calibration Rig Adaptor - SOLOnet

AMETEK Land

AMETEK Land item no. 801486 Calibration Rig Adaptor - SOLOnet

Additional Calibration Points

AMETEK Land

AMETEK Land item no. CAL PTS Add additional calibration test points to the Standard 3 point ISO Certificate (optional item). Test points must be specified by customer. PLEASE ENTER THE TEMPERATURE...

13 Prism Super Retro for 4500

Write a Review

AMETEK Land

13 Prism Super Retro for 4500

Description

0 Reviews

Related Products